|
Title: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: motolady on March 10, 2013, 01:45:07 PM So, I've been learning everything as I go with my whole Monster Project. When I was working out the front end swap (2001 748 onto a 1998 750 Monster) the geometry of the offset and rake was something I came to understand. I know I need a steering stabilizer, and now I'm just trying to figure out the best way to do it.
Here's my Monster in it's current form: (http://25.media.tumblr.com/e8dfd2d4acf970c8cef242105d7d9e53/tumblr_miv0j7wcPr1qgolyao1_1280.jpg) The triples and entire front end are from the 748 and the steering stem and rest of the bike is the M750. I've looked at the side mount options (a while back) which I find kind of ugly but hey, they do their job. My concern is having them match the bike. Are there any options that I can get in black and/or gold? Title: Re: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: Dirty Duc on March 10, 2013, 02:28:03 PM Check out a Scott's damper. You'll probably have to call them to make sure it is put together for your bike, but they come in gold, and they are top mount.
Title: Re: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: Howie on March 10, 2013, 05:33:34 PM Hyper Pro has a black and gold side mount for Monsters. Since you have superbike forks you will need a different fork mount though Give them a call.
http://www.hyperpro.com/hyperpro/en/node/22 (http://www.hyperpro.com/hyperpro/en/node/22) Title: Re: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: moto on March 13, 2013, 02:12:32 PM This mount allows you to use a little Ohlins damper under the triple on early monsters (http://motowheels.com/images/T58485773.jpg) MW Billet Steering Damper Mount: Monster (http://motowheels.com/i-6922775-mw-billet-steering-damper-mount-monster.html) You will need a little shim to reduce the size down to a an SBK fork. We have them for the lower triple--they can be cut down in size: CORSE DYNAMICS Lower Triple Clamp Conversion Shims (http://motowheels.com/i-8121511-corse-dynamics-lower-triple-clamp-conversion-shims.html) Title: Re: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: zooom on March 14, 2013, 06:33:41 AM This mount allows you to use a little Ohlins damper under the triple on early monsters (http://motowheels.com/images/T58485773.jpg) MW Billet Steering Damper Mount: Monster (http://motowheels.com/i-6922775-mw-billet-steering-damper-mount-monster.html) You will need a little shim to reduce the size down to a an SBK fork. We have them for the lower triple--they can be cut down in size: CORSE DYNAMICS Lower Triple Clamp Conversion Shims (http://motowheels.com/i-8121511-corse-dynamics-lower-triple-clamp-conversion-shims.html) that would be the route I would go!!! BTW Motolady...I love some of the various pics and posts you put on FB BTW, when I get the opportunities to look at FB. Title: Re: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: Slide Panda on March 14, 2013, 08:51:17 AM Undermount FTW. Minimizes the clutter and will stand less of a chance of getting mangled vs the side mounting.
Title: Re: suggestions for steering stabilizer? 750 monster w/ 748 front end Post by: 2001cromo on March 14, 2013, 04:36:40 PM +3 on the undermount.
not the greatest picture showing it, but you should get an idea... (http://www.no1special.com/mychromo/web/img/bike-portrait-L.jpg) My only minor complaint is it looses a little bit of turn (I can't remember right or left) but you only notice this if you're moving it around it tight places. |