Hey guys
I 'd like to install a danmoto 180 on my 750 monster. I opened the original gauge and so many wires.
Anybody done this before?
I do not want every option to work but at least the majors would be great.
Is anyone have wiring diagram for the oem cluster?
HELP please
Here's a diagram of a 96 900. Should be pretty similar.
http://www.ducatimonsterforum.org/index.php?topic=62211.msg1154619#msg1154619 (http://www.ducatimonsterforum.org/index.php?topic=62211.msg1154619#msg1154619)
Wonderful , thank you for your help , but something is not clear for me.
If you see this diagram the #7 unit is -dashbord warning lights . each light has colored wire but I cannot find out what is the letter mean between the wire and the unit.for example : from the turn signal indicator starts two wire lines and there is two letters E F (what are these letters means?) than the wire colors w/bk and w/g (I know these are the colors of the wires )
I'm pretty sure the letters E and F just signify the position in the connector. They may, or may not be marked.
The letters are just there on the diagram to show which fuse corresponds to it. See the fuse legend in the pic DP posted?
Quote from: memper on April 15, 2013, 10:23:43 PM
The letters are just there on the diagram to show which fuse corresponds to it. See the fuse legend in the pic DP posted?
I'd agree except there are 5 fuses in a monster fuse panel, and that connector has 12 letters. ;)
Thanks guys , wish me luck plz.
Pretty soon I will finish my cafe project and I will make a longer story from all the helps came from here .
This site is the best because of these wonderful members.
Anyway how can I post pictures here?
(http://i1307.photobucket.com/albums/s586/ducati998hyper1/20130407_140935_zpsae700718.jpg)
Quote from: Racka0 on April 16, 2013, 06:37:04 AM
(http://s1307.photobucket.com/user/ducati998hyper1/media/20130407_140935_zpsae700718.jpg.html#/user/ducati998hyper1/media/20130407_140935_zpsae700718.jpg.html?&_suid=136610858878507712323373397598)this is where the project right now
Just so you know...
a link to your photo library will not display as an image. You have to link the location of the individual images.
I got it. Thanks
Guys , here is the color code if someone decide to install danmoto 180 .
Wiring harness (right before the dashboard connection) Danmoto wires
Yellow ----------------- BROWN
Black ----------------- GREEN
Yellow/Black ----------------- BLUE
Black /White ------------------ ORANGE
Black/Blue ------------------ RED
Yellow/White ------------------- BLUE/WHITE
Light Green/White ------------------- LIGHT BLUE
Yellow/Green ------------------- LIGHT BLUE/RED
On my bike (99 750 monster ) I cannot connect -the danmoto Purple ( temperature sensor )
-and because of some reason if I connect the Yellow /White ( fuel level sensor ) to the harness brown/white than all the lights just come up so I decided not to use this wire.
- and the Light blue /black will be the RPM as soon as I get the resistor .
It took me arond an Hour to figure it out (but I had a hint from this FORUM) T H A N K S 0-)
Just to make it clear. You do not need the resistor to hook up the rpm its sounds accurate without it.
Good luck
I didn't need a resistor for my motoscope pro. You have to use the negative for 1 cool. It's a spade connector under the coil.
its almost done!!
(//URL=http://s1307.photobucket.com/user/ducati998hyper1/media/telorol611_zps31b89529.jpg.html%5Dhttp://%5Bimg%20width=800%20height=600%5Dhttp://i1307.photobucket.com/albums/s586/ducati998hyper1/telorol611_zps31b89529.jpg)[/URL]][/img]