Hello DMF people! Anyone knows where the air bleed and idling adjustments are in a 2007 s4rs? It just won't idle right and I read somewhere that I need to do the air bleeds screw first. I did change from short pipes to the dual termis and ever since, it wont idle right anymore. Any opinion, picture, idea will really help. Thanks in advance.
was the ecu changed?
Quote from: brad black on April 28, 2013, 02:13:05 AM
was the ecu changed?
No it wasn't. Is it that big of a difference?
if you have replaced the ecu then it'd need the tps reset. if not, not needed.
air bleeds are large brass headed scrwes on the rh side. similar to teh desmoquattro stuff in this report: http://www.bikeboy.org/ducati4vthrottleb.html (http://www.bikeboy.org/ducati4vthrottleb.html)
Quote from: brad black on April 29, 2013, 04:46:04 AM
if you have replaced the ecu then it'd need the tps reset. if not, not needed.
air bleeds are large brass headed scrwes on the rh side. similar to teh desmoquattro stuff in this report: http://www.bikeboy.org/ducati4vthrottleb.html (http://www.bikeboy.org/ducati4vthrottleb.html)
Thank you Brad. Big help. I'll start looking at it this weekend.
Quote from: richard on May 01, 2013, 05:35:20 PM
Thank you Brad. Big help. I'll start looking at it this weekend.
Well Brad. I chickened out and brought it to a reputable mechanic. Don't wanna make it any worse. We'll see what the outcome is next week. Thanks for your help anyway!