Print Page - put motor in. starting. click click click.

Title: put motor in. starting. click click click.
Post by: jaxduc on May 27, 2013, 02:21:44 PM

Swapped out head gaskets. Motor is back in. Turns on and click click click. What to check?. Video to folow. Thanks

Title: Re: put motor in. starting. click click click.
Post by: jaxduc on May 27, 2013, 02:28:45 PM

09 696

Title: Re: put motor in. starting. click click click.
Post by: OzzyRob on May 27, 2013, 03:58:53 PM

The battery charged and good, no significant voltage drop when trying to turn it over, starter motor earth & positive, if that's good, grab a wiring diagram and check every connection (clean & tight) in the starter circuit.

Title: Re: put motor in. starting. click click click.
Post by: jaxduc on May 27, 2013, 05:24:51 PM

Nevermind. I figured it out. Workimg fine now!
Thanks though.

Title: Re: put motor in. starting. click click click.
Post by: SpikeC on May 27, 2013, 06:26:18 PM

What was the problem?

Title: Re: put motor in. starting. click click click.
Post by: jaxduc on May 28, 2013, 02:14:50 AM

Its always the simple things.
The problem was an oversight on my part. The line that connects the starter switch to the starter, there is a little rubber washer that I had in the wrong place.
I assembled:
Connector
Washer
Nut

When instead it should have been:
Washer
Nut
Connector
Nut

Basically I was insulating the line instead of letting it make its connection.

Ducati Monster Forum

Moto Board => Tech => Topic started by: jaxduc on May 27, 2013, 02:21:44 PM