|
Title: 2002 M750ie tach issue Post by: KIKH400 on May 28, 2013, 09:07:17 AM My tach just started this the other day--
The tach needle starts in about the 5 o'clock position, and sweeps up when you turn the key. The sweep is about the same distance as when it worked right. It sweeps up, then returns to the 5 o'clock position. When I start and run the bike, the tach movement seems about the same as it did, except that it starts at about 5 o'clock, where it used to start at about 8 o'clock (700 rpm or so). The bike runs fine. It seems like the tach needle just slipped, and is now just oriented wrong. Any advice? Title: Re: 2002 M750ie tach issue Post by: Speeddog on May 28, 2013, 11:45:51 AM Most likely the needle has just slipped on the shaft.
Problem is, the only way to open a 2002 cluster is cutting. IIRC, someone has done a FAQ or how-to post here somewhere.... Check your cluster, it *may* be a later model that can be opened. Title: Re: 2002 M750ie tach issue Post by: KIKH400 on June 04, 2013, 02:01:37 PM Thanks. I'll take the face off when I can. For now, just riding
Title: Re: 2002 M750ie tach issue Post by: cmejia1978 on June 05, 2013, 08:07:06 AM no, no nooooo; I did it and no cutting at all, here are some pics to help you:
http://www.flickr.com/photos/80492390@N05/sets/72157631906503470/ (http://www.flickr.com/photos/80492390@N05/sets/72157631906503470/) The tricky part is how to tack the back little pins that hold the needles.. patience LOTS of it... http://www.flickr.com/photos/80492390@N05/sets/72157633404066625/ (http://www.flickr.com/photos/80492390@N05/sets/72157633404066625/) [coffee] Title: Re: 2002 M750ie tach issue Post by: KIKH400 on June 11, 2013, 10:17:54 AM Thanks. I've been riding when I have the time rather than fixing. At this point, its bothering me less and less and it may have to wait until cold weather.
|