Print Page - removing the oil pressure switch

Title: removing the oil pressure switch
Post by: Blue on May 28, 2013, 07:56:28 PM

Should one want to remove the oil pressure switch and plug the hole, is this what is needed?
DUCATI Exhaust Plug (http://motowheels.com/i-8518920-ducati-exhaust-plug.html)
I thought I had read this somewhere, but I cannot remember where I ran across this.
Thanks.

Title: Re: removing the oil pressure switch
Post by: Howie on May 28, 2013, 10:31:35 PM

If it does fit I'd be surprised. Remove switch, use another vehicle, drive to parts store, match thread, buy crush washer. Why do you want to do this?

Title: Re: removing the oil pressure switch
Post by: avizpls on May 29, 2013, 06:44:08 AM

i wanna say m10x1?

Title: Re: removing the oil pressure switch
Post by: ducatiz on May 29, 2013, 07:19:31 AM

It is M10x1.

I've seen people swap it with another sensor, but plugging for good??

Title: Re: removing the oil pressure switch
Post by: Blue on May 29, 2013, 11:12:37 AM

I found the thread that I was looking for:
Re: How big's yer stud? [Project Motor - 900IE (2002)] (http://www.ducatimonsterforum.org/index.php?topic=36864.msg648735#msg648735)
I guess my searching powers were weak last night. Thanks for the help. [thumbsup]

Ducati Monster Forum

Moto Board => Tech => Topic started by: Blue on May 28, 2013, 07:56:28 PM