|
Title: Need new pegs Post by: muskrat on July 04, 2013, 04:51:47 AM I have Gilles rear sets on my s4r, 2006, but don't remember much more than that. Are the pegs universal? Looking for gripper vortex or similar brand so I quit sliding off. Thanks
(http://i433.photobucket.com/albums/qq53/montey2005/1438507B-1C1C-4B3D-93B9-C0D402FD478B-10809-00000587E9DFA96B_zps3cd5c272.jpg) Title: Re: Need new pegs Post by: Speeddog on July 04, 2013, 08:29:32 AM The Gilles are a bit special, but I think if you get ones with same thread, you'll be ok.
Title: Re: Need new pegs Post by: muskrat on July 04, 2013, 08:31:49 AM What thread would that be?
Title: Re: Need new pegs Post by: danaid on July 04, 2013, 11:18:30 AM I used Sato rear sets the the knurl is very course with no sliding and will easily shave the leather off your boots. :o
This is a good close up of and description of the pegs. http://www.satoracing.com/ducatifootpegs.htm (http://www.satoracing.com/ducatifootpegs.htm) You have to search the site, the universal and Ducati only, pegs only, are spread thru their web site. http://www.satoracing.com/rearsetstop.htm (http://www.satoracing.com/rearsetstop.htm) http://www.satoracing.com/universalstepbarkit.htm (http://www.satoracing.com/universalstepbarkit.htm) Ordered mine from http://www.kyleusa.com/ (http://www.kyleusa.com/) Title: Re: Need new pegs Post by: cayman s on July 04, 2013, 01:02:01 PM The Gilles footpegs are non-folding, unlike the Satos at the link. It looks like if you were to remove the folding component from the Satos, the footpeg would be way short.
These non-folding pegs might work better. They're a whole lot less money. I think the bolt is 8mm. http://www.af1racing.com/store/Scripts/prodView.asp?idproduct=2956 (http://www.af1racing.com/store/Scripts/prodView.asp?idproduct=2956) I installed a pair I bought from AF1 on my 999 to replace the slippery OEM pegs and they worked just fine. Title: Re: Need new pegs Post by: bob795 on July 04, 2013, 11:18:58 PM I have Ducati Designs' footpegs (the Tour peg) on my Monster
http://www.ducatidesigns.com/inc/sdetail/3794/3793 (http://www.ducatidesigns.com/inc/sdetail/3794/3793) I love it, easy to install and most importantly it's really grippy [thumbsup] I got rid of the stock foot pegs because the stocks were really slippery when wet, my foot slipped off the peg many times that it's quite scarry, not any more now. Title: Re: Need new pegs Post by: muskrat on July 06, 2013, 06:13:38 PM Thanks all. I'm going to look for 8mm pegs. I like vortex but can't findmthemm
|