Ducati Monster Forum

Moto Board => Tech => Topic started by: Ledz558 on September 04, 2013, 10:12:14 PM

Title: instrument panel
Post by: Ledz558 on September 04, 2013, 10:12:14 PM
Has anybody out there taken one of these things apart? I need to just get in the right lens to put the needle back in place. I noticed today the gasket around both lenses. Can't tell how this thing is put together by just noticing one tiny screw on the bottom of the middle light panel.

Thanks
Title: Re: instrument panel
Post by: Speeddog on September 05, 2013, 08:10:33 AM
It depends.

Which year and model are you asking about?
Title: Re: instrument panel
Post by: Ledz558 on September 10, 2013, 06:30:33 PM
hey speeddog I musta told you my bike so many times...its always the same reply you give when I post. Its the regular monster panel  that's on most monsters..  [coffee]
Title: Re: instrument panel
Post by: Speeddog on September 10, 2013, 08:12:55 PM
Sorry for not remembering.... there's quite a few folks here.

The reason I ask is, it's relevant.

The early Monster cluster, '02 - ~'04, cannot be disassembled without cutting.

Later ones, ~'05 and on, can be disassembled.
Title: Re: instrument panel
Post by: thorn14 on September 11, 2013, 08:57:37 AM
What can't be cut? Isn't the needle easily accessible without cutting? I have an '02 cluster and (what I was told) an '05 cluster. The only difference between the two is one has a second screw holding the front cover on vs being popped off.
Title: Re: instrument panel
Post by: Ledz558 on September 11, 2013, 03:43:23 PM
yeah that's what I noticed about the little screw on the back of the light panel. I figured if I take that off why can't then the plastic around the lens just pop off, or maybe it's all connected together as one piece. I can't tell by looking at it, but I do notice that it looks possible to do..
Title: Re: instrument panel
Post by: thorn14 on September 11, 2013, 06:02:17 PM
Well once you get that first center piece off with the screw there should be one more screw directly underneath the cover to lift off the whole front cover.

(http://farm2.static.flickr.com/1070/957450090_c86a076ef7.jpg?v=0)
Right in the middle where he lifted the cover off theres a screw hole.

I have gauges from a 2002 where theres one screw, and gauges from a 2005 where its two screws. The center one on both I believe is a torx bit.
Title: Re: instrument panel
Post by: Ledz558 on September 12, 2013, 11:30:37 AM
thanks! this ones off a 2006 but it looks exactly like that. The right needle came out and is sideways between the plastic and face. Now I don't have to send it across the US to have someone else fix it and have it happen again when they send it back.
Seems whenever you send these the mail disrupts the right needle causing it to come off, had it happen twice.