|
Title: my M900 Post by: pepeducat on October 17, 2013, 04:13:06 AM After my presentation, I present to you my 1995 M900 that I'm restoring.
A photo before restoration (http://imageshack.us/a/img12/4082/monstertom1.jpg) And there or it is now (https://dl.dropboxusercontent.com/u/42766370/forum/plan%C3%A8te%20ducati/eoly.jpg) (https://dl.dropboxusercontent.com/u/42766370/forum/plan%C3%A8te%20ducati/s9gw.jpg) I did a complete overhaul of the engine, lightened everything that could be mounted on the cylinder and piston 944 DUCATI ST2 (I re-configuration cooling oil), the KEIHIN FCR 39, preparation of heads and an ignition IGNITECH housing. Title: Re: my M900 Post by: pepeducat on October 17, 2013, 04:29:34 AM Thank you I was not sure I put in the right place ;D
Title: Re: my M900 Post by: koko64 on October 17, 2013, 04:37:10 AM Welcome to a great forum.
So what exactly did you do in the overhaul? You use an ST2 top end? Nice carbs by the way. Title: Re: my M900 Post by: Slide Panda on October 17, 2013, 04:44:57 AM Before?
Gracious that bike was clean and in pretty fine shape 'before' considering it's old enough to vote Title: Re: my M900 Post by: pepeducat on October 17, 2013, 07:02:47 AM Welcome to a great forum. So what exactly did you do in the overhaul? You use an ST2 top end? Nice carbs by the way. I kept the original heads, and just condemn the H ² O circuit and open the oil circuit as the original cylinders. I can do a tutorial if you want :) You win 40 cc, and you up your compression ratio of 10.5/1 [thumbsup] Title: Re: my M900 Post by: Blue on October 17, 2013, 07:31:23 AM I kept the original heads, and just condemn the H ² O circuit and open the oil circuit as the original cylinders. I can do a tutorial if you want :) You win 40 cc, and you up your compression ratio of 10.5/1 [thumbsup] I would be interested in seeing the tutorial for this. Sounds like you're having fun. [thumbsup] Title: Re: my M900 Post by: MonsterHPD on October 17, 2013, 11:40:25 AM I would be interested in seeing the tutorial for this. Sounds like you're having fun. [thumbsup] Agree, please do a tutorial for this, first time I hear of that mod [thumbsup] Title: Re: my M900 Post by: pepeducat on October 17, 2013, 12:02:22 PM well at least it works very well, it is the fifth that I do and it works very well [thumbsup]
I will do the tutorial, and you translate correctly ;) Title: Re: my M900 Post by: koko64 on October 17, 2013, 12:10:23 PM Sounds very interesting, please show us.
Title: Re: my M900 Post by: pepeducat on October 17, 2013, 12:34:11 PM I made a tutorial here (http://www.ducatimonsterforum.org/index.php?topic=65580.0)
Title: Re: my M900 Post by: Rob Hilding on October 17, 2013, 01:33:53 PM [popcorn]
subscribed Title: Re: my M900 Post by: pepeducat on October 19, 2013, 10:03:03 AM Today I finished my battery tray and finished to integrate electricity.
Me I like it (http://img9.imageshack.us/img9/5846/ui06.jpg) (http://img689.imageshack.us/img689/463/i8ba.jpg) (http://img5.imageshack.us/img5/9585/ha6q.jpg) (http://img811.imageshack.us/img811/5395/0q01.jpg) Title: Re: my M900 Post by: pepeducat on October 21, 2013, 12:44:20 PM Coil wiring completed ;D (http://img191.imageshack.us/img191/1173/3no8.jpg) (http://img689.imageshack.us/img689/7171/gna6.jpg) (http://img545.imageshack.us/img545/1706/nao5.jpg) Title: Re: my M900 Post by: DarkMonster620 on October 21, 2013, 01:26:24 PM Nice bike pepeducat . . .
Title: Re: my M900 Post by: joshuajcrouch on October 21, 2013, 05:57:06 PM Love your battery box. Thats clean! Did you make it yourself?
Title: Re: my M900 Post by: koko64 on October 21, 2013, 06:44:39 PM Very nice work. [thumbsup]
Title: Re: my M900 Post by: pepeducat on October 23, 2013, 05:33:31 AM Love your battery box. Thats clean! Did you make it yourself? I did not do so by a friend who has the necessary tools, I do not have a welder for aluminum. Title: Re: my M900 Post by: sleepyJ on October 23, 2013, 05:25:33 PM love your tank and your own custom touch! [thumbsup]
what are your plans for the exhaust? Title: Re: my M900 Post by: monsta on October 27, 2013, 12:39:22 AM nice welds! [thumbsup]
Title: Re: my M900 Post by: pepeducat on October 28, 2013, 04:18:10 AM love your tank and your own custom touch! [thumbsup] what are your plans for the exhaust? This will be of high carbon exhaust silmotor (https://lh6.googleusercontent.com/-YflwGAuMHeI/UfZzjOKHjSI/AAAAAAAABqE/dn1pzkiOVwc/s640/blogger-image-1133412215.jpg) Title: Re: my M900 Post by: pepeducat on November 24, 2013, 11:17:12 AM work in progress ...
(http://imagizer.imageshack.us/v2/800x600q90/18/kdk2.jpg) Title: Re: my M900 Post by: joshuajcrouch on November 24, 2013, 02:04:20 PM Very nice. Please us updated on your progress.
Title: Re: my M900 Post by: pepeducat on November 25, 2013, 02:07:35 PM I finished the engine, ilne remains to finish connecting the housing IGNITECH, receive my battery SKYRICH and the bike will finally start.
Then he left for me to strip the tank, change the channel kit, and some other small things. That's all for now ;D Title: Re: my M900 Post by: Rudemouthsky on November 28, 2013, 02:40:40 AM Coil wiring completed ;D (http://img191.imageshack.us/img191/1173/3no8.jpg) (http://img689.imageshack.us/img689/7171/gna6.jpg) (http://img545.imageshack.us/img545/1706/nao5.jpg) Beautiful! [clap] Love this custom battery/coil/Ignitech box. Title: Re: my M900 Post by: pepeducat on December 10, 2013, 05:53:52 AM That is it starts, but I need to change the O-rings RCF, it leaks badly.
Otherwise before you start, I did run the engine without the candles to bring up the oil, then I controlled via rocker that traps oil rose well. http://www.youtube.com/v/ECdp1C7mhTo? Title: Re: my M900 Post by: seanster on December 10, 2013, 10:01:07 AM Very nice/clean work.
Title: Re: my M900 Post by: pepeducat on December 25, 2013, 02:41:36 AM Electrical circuit around my tank and my battery finally finished 8)
(http://imagizer.imageshack.us/v2/800x600q90/191/n1ui.jpg) (http://imagizer.imageshack.us/v2/800x600q90/18/65ch.jpg) (http://imagizer.imageshack.us/v2/800x600q90/560/y5y4.jpg) (http://imagizer.imageshack.us/v2/800x600q90/842/1qsu.jpg) I got some of my joints for the keihin, the rest comes from the USA next week, and Thursday 2 I bring my tank to sand. I still have misses the chain kit, the silents block rear wheel pad and two three things .... and I can make her break Title: Re: my M900 Post by: Rudemouthsky on December 25, 2013, 03:53:27 PM I LOVE that battery/coil/Ignitech box. Want one...
Title: Re: my M900 Post by: pepeducat on January 26, 2014, 01:06:48 PM I'm going to cut this piece by laser cutting, it will serve me to fix my meter block.
(http://imagizer.imageshack.us/v2/800x600q90/703/jygh.png) Title: Re: my M900 Post by: pepeducat on January 28, 2014, 10:25:00 PM Changing ring seals on KEIHIN as they flee
(http://imagizer.imageshack.us/v2/800x600q90/839/u5kv.jpg) (http://imagizer.imageshack.us/v2/800x600q90/607/dufm.jpg) Title: Re: my M900 Post by: pepeducat on January 30, 2014, 03:50:14 AM My new tank RoAdRaCiNg ;D
(http://imagizer.imageshack.us/v2/800x600q90/600/jq6e.jpg) (http://imagizer.imageshack.us/v2/800x600q90/28/vjlb.jpg) Title: Re: my M900 Post by: pepeducat on February 03, 2014, 03:10:28 PM a visual of Roadracing
(http://imagizer.imageshack.us/v2/800x600q90/196/rr42.jpg) (http://imagizer.imageshack.us/v2/800x600q90/594/va2u.jpg) (http://imagizer.imageshack.us/v2/800x600q90/196/z2em.jpg) I received my little piece LASER cutting, mounted it on the tee to lower the meter, it looks like this (http://imagizer.imageshack.us/v2/800x600q90/844/8nw5.jpg) (http://imagizer.imageshack.us/v2/800x600q90/853/ted2.jpg) (http://imagizer.imageshack.us/v2/800x600q90/811/5k9m.jpg) Title: Re: my M900 Post by: pepeducat on February 07, 2014, 03:17:05 PM Before it fell not good because the tank was not designed for ie carburettor
(http://imagizer.imageshack.us/v2/800x600q90/707/2ow3.jpg) After this is perfect (http://imagizer.imageshack.us/v2/800x600q90/835/1lty.jpg) (http://imagizer.imageshack.us/v2/800x600q90/822/nl45.jpg) (http://imagizer.imageshack.us/v2/800x600q90/856/9qbg.jpg) Title: Re: my M900 Post by: pepeducat on February 15, 2014, 05:30:23 AM I put one eye
(http://imagizer.imageshack.us/v2/800x600q90/845/jb7q.jpg) (http://imagizer.imageshack.us/v2/800x600q90/841/k8sa.jpg) (http://imagizer.imageshack.us/v2/800x600q90/713/k53p.jpg) Title: Re: my M900 Post by: Rudemouthsky on February 15, 2014, 06:35:16 AM Lookin' good Pepe! [popcorn]
Title: Re: my M900 Post by: pepeducat on March 16, 2014, 02:33:53 PM Today is silent block change rear wheel.
Disposal of old silent block hammer and screwdriver, and there remains only the sleeves cut with Dremel. And finally I pulled the sleeves with pliers. (http://img1.imagilive.com/0314/WP_20140309_003.jpg) The result (http://img1.imagilive.com/0314/WP_20140309_004247.jpg) Then wound with a sleeve 27 and a mallet, which gives (http://img1.imagilive.com/0314/WP_20140309_005.jpg) Title: Re: my M900 Post by: pepeducat on April 06, 2014, 05:06:06 AM M944 after my basic settings ignition and carburetion
mon 944 (http://www.youtube.com/watch?v=Ip-Ypd_du0Q#ws) Title: Re: my M900 Post by: pepeducat on May 24, 2014, 01:09:16 PM I have to mount it on my 944 ;D
(https://lh4.googleusercontent.com/-6TtGfXI0_D0/UzCqudQOx1I/AAAAAAAAANA/xblzLOjAc2s/s640/DSC02057.JPG) Title: Re: my M900 Post by: DucHead on May 24, 2014, 02:53:46 PM [thumbsup] [popcorn]
Title: Re: my M900 Post by: seanster on June 07, 2014, 10:00:47 AM Nice!
Off topic, but that top triple from the SuperSport correct? Which one do you know? Title: Re: my M900 Post by: muskrat on June 08, 2014, 03:13:07 PM following this thread makes me miss my 900 [bang]
good work btw Title: Re: my M900 Post by: The Don on June 09, 2014, 12:29:50 AM Very nicely done
Title: Re: my M900 Post by: pepeducat on June 09, 2014, 11:13:52 AM Nice! Off topic, but that top triple from the SuperSport correct? Which one do you know? 900 SS carburator and 900 SSie 98/99 [thumbsup] polishing day (http://i39.servimg.com/u/f39/17/75/90/33/wp_20121.jpg) Title: Re: my M900 Post by: monsta on June 12, 2014, 04:48:02 AM looking good! [beer]
where did you get the tank? Title: Re: my M900 Post by: pepeducat on June 12, 2014, 06:28:09 AM I had the tank in France, but the project changes as it progresses [evil]
Title: Re: my M900 Post by: Rudemouthsky on June 12, 2014, 06:53:36 AM I had the tank in France, but the project changes as it progresses [evil] That RR tank just doesn't look right with this particular project. I'll send you my address and take it off your hands for ya. ;) Title: Re: my M900 Post by: pepeducat on June 12, 2014, 07:26:20 AM Too late, there already have one that load ....
Now it looks like this Remains that some parts will come and it will be ready to ride this summer, before being disassembled next winter to paint and a homemade swingarm ;) (http://img1.imagilive.com/0614/WP_20140502_016.jpg) (http://img1.imagilive.com/0614/WP_20140502_015.jpg) Title: Re: my M900 Post by: pepeducat on June 21, 2014, 12:43:06 PM I received and opened this package ....... (http://i39.servimg.com/u/f39/17/75/90/33/wp_20131.jpg) (http://www.servimg.com/image_preview.php?i=64&u=17759033) Wahouuu !!!!! (http://i39.servimg.com/u/f39/17/75/90/33/wp_20132.jpg) (http://www.servimg.com/image_preview.php?i=65&u=17759033) And on the bike (http://i39.servimg.com/u/f39/17/75/90/33/wp_20133.jpg) (http://www.servimg.com/image_preview.php?i=66&u=17759033) (http://img1.imagilive.com/0614/WP_20140620_005.jpg) (http://img1.imagilive.com/0614/WP_20140620_008.jpg) Title: Re: my M900 Post by: Rudemouthsky on June 21, 2014, 12:46:07 PM Is the Roadracing tank for sale? :)
Title: Re: my M900 Post by: pepeducat on June 21, 2014, 12:50:40 PM In fact I never find saddle that fits perfectly, so Roadracing tank sold, and this winter I will modify a reservoir original Roadracing
Title: Re: my M900 Post by: Rudemouthsky on June 21, 2014, 04:35:19 PM Damn it must be nice to just buy and sell RoadRacing tanks at will..
Title: Re: my M900 Post by: pepeducat on June 21, 2014, 09:57:49 PM Let's say I made a good move in the history ;)
Title: Re: my M900 Post by: pepeducat on July 04, 2014, 12:53:43 PM My first real break kilometers .... [Dolph]
I made it [evil] (http://img1.imagilive.com/0614/Capture_du_2014-06-29_1049420c7.png) ROAD-BOOK Drôme, Hautes-Alpes et Vaucluse (https://www.google.fr/maps/dir/Pont-Saint-Esprit/Serres/Valdr%C3%B4me/R%C3%A9muzat/Buis-les-Baronnies/Vaison-la-Romaine/Pont-Saint-Esprit/@44.3659822,4.9060777,10z/data=!3m1!4b1!4m49!4m48!1m5!1m1!1s0x12b5a6cb0c61cea1:0x4078821166b3c30!2m2!1d4.648079!2d44.261034!1m5!1m1!1s0x12cae2945764d099:0x92cdb0cf90e13e99!2m2!1d5.714984!2d44.428499!1m5!1m1!1s0x12cae603804a2bcb:0x408ab2ae4bfb590!2m2!1d5.571565!2d44.504108!1m10!1m1!1s0x12ca8d0b681a76a5:0x408ab2ae4bfbb80!2m2!1d5.354184!2d44.412968!3m4!1m2!1d5.3519505!2d44.3565944!3s0x12ca8c7d58f93e81:0x6defa261e0bc7821!1m5!1m1!1s0x12ca6270e66615f1:0x408ab2ae4bfc7a0!2m2!1d5.27413!2d44.276186!1m5!1m1!1s0x12b5809d47a513ad:0x40819a5fd8fbe90!2m2!1d5.075198!2d44.240968!1m5!1m1!1s0x12b5a6cb0c61cea1:0x4078821166b3c30!2m2!1d4.648079!2d44.261034!3e0?hl=fr) Title: Re: my M900 Post by: pepeducat on February 24, 2015, 01:33:21 PM Hello, some of my new Monster Tank change for a new one because mine was all corroded and began to flee .... Then I removed the cylinder heads to mount camshafts 900SSie (which have almost the same survey valves). The everything was back without cylinder base gasket to have a 1mm squish. Place the picture disassembly (http://s22.postimg.org/eommpaxf5/WP_20150201_001.jpg) (http://s22.postimg.org/67n4edsq9/WP_20150201_002.jpg) (http://s22.postimg.org/h9s7ctmsx/WP_20150201_004.jpg) Installation and adjustment of camshafts 900SSie (http://s13.postimg.org/lwmosu31j/WP_20150201_006.jpg) reassembly [evil] (http://i.imgur.com/W2fHpHql.jpg) Title: Re: my M900 Post by: Rizoto on May 15, 2015, 08:09:21 AM What's new on this M900? ;)
Title: Re: my M900 Post by: pepeducat on June 01, 2015, 12:31:35 PM Here is the latest evolution of my M944CR (http://s29.postimg.org/f1g3sg9t3/WP_20150408_012.jpg) (http://s29.postimg.org/428om2njb/WP_20150408_007.jpg) (http://s29.postimg.org/k9ez24ujr/WP_20150408_009.jpg) (http://s29.postimg.org/i7ehnvwkn/WP_20150408_010.jpg) (http://s29.postimg.org/j8eqd0dk7/WP_20150408_011.jpg) Title: Re: my M900 Post by: m9hundo on June 01, 2015, 05:14:20 PM so fresh and so clean [thumbsup]
Title: Re: my M900 Post by: Rudemouthsky on June 02, 2015, 05:28:17 AM The paint looks fantastic! Love the ghost stripe.
Title: Re: my M900 Post by: pepeducat on June 02, 2015, 11:19:51 PM First I made the black paint and satin varnish and finally the stripe with gloss varnish.
Next step, five-spoke wheel mounting 1000 ssie [evil] (http://img1.imagilive.com/0615/WP_20150410_002.jpg) Title: Re: my M900 Post by: dhealy on June 08, 2015, 08:47:14 PM What kind of front fender is that?
Title: Re: my M900 Post by: pepeducat on June 09, 2015, 01:13:59 PM Ducati 851 Racing here -------> ricambiweiss.com (http://ricambiweiss.com/fr/ducati/403-dr81-garde-boue-avant-ducati-750-900ss-monster.html)
Title: Re: my M900 Post by: pepeducat on July 23, 2015, 01:10:45 PM Today we made it (http://s15.postimg.org/sgyr7tucr/WP_20150723_001.jpg) We saw it (http://s22.postimg.org/ygpecjb5t/WP_20150723_13_59_08_Panorama.jpg) with that (http://s4.postimg.org/upu6w0u6l/WP_20150723_015.jpg) Title: Re: my M900 Post by: kopfjäger on July 23, 2015, 03:09:08 PM [thumbsup]
Title: Re: my M900 Post by: koko64 on July 25, 2015, 06:09:05 PM +1 [thumbsup]
Title: Re: my M900 Post by: pepeducat on August 03, 2015, 02:11:22 PM Testing of new wheels 900 ssie.
They will be painted black this winter. (http://s4.postimg.org/6paq4w5st/DSCN1129.jpg) (http://s4.postimg.org/ybdhpkp5p/DSCN1130.jpg) Title: Re: my M900 Post by: koko64 on August 03, 2015, 02:37:03 PM Nice work. [thumbsup]
Please share how you did the small axle conversion? I like the 5 spoke wheels. Title: Re: my M900 Post by: pepeducat on August 03, 2015, 03:08:00 PM At the rear is plug'n play with a wheel 900 or 1000 ssie
To the front I will put a fork ST2 as with the original fork too much modification to do and I put the brake calipers 999 [evil] Title: Re: my M900 Post by: pepeducat on August 06, 2015, 01:41:17 PM Montée du Mont Ventoux (http://www.youtube.com/watch?v=dLqGRXwelZE#)
Title: Re: my M900 Post by: pepeducat on September 08, 2015, 06:22:07 AM Changing the fork and stirrups, it slows strong
(http://s14.postimg.org/sw305fbv5/DSCN1193.jpg) Title: Re: my M900 Post by: koko64 on September 08, 2015, 11:16:40 AM Looks a good combination. [thumbsup]
Title: Re: my M900 Post by: pepeducat on October 03, 2015, 12:38:02 AM I found a fork ST4S, which is much better than ST2.
So I put on the Mostro (http://s3.postimg.org/or6zem75f/DSCN1210.jpg) (http://s3.postimg.org/wetvwx5tf/DSCN1211.jpg) Title: Re: my M900 Post by: pepeducat on October 18, 2015, 02:05:14 PM Upgrade Ignition [evil] coils Dynatech Mini 3 ohms
(https://farm1.staticflickr.com/738/22096686428_a90ceb30f4_c.jpg) (https://farm1.staticflickr.com/573/22096684428_f1acafbce4_c.jpg) (https://farm6.staticflickr.com/5767/22097569419_c5aece7f87_c.jpg) Title: Re: my M900 Post by: pepeducat on October 20, 2015, 11:02:54 AM (https://farm1.staticflickr.com/575/21717327043_9f3c91400f_c.jpg)
Title: Re: my M900 Post by: pepeducat on December 24, 2015, 08:10:41 AM the bike runs much better, the times are more frank, I even slowed down my.
(http://i.imgur.com/HKlCJEsl.jpg) (http://i.imgur.com/gKNh5VZl.jpg) And......Kaemna Flywheel alloy ergal, 580gr [evil] (http://img1.imagilive.com/1215/IMG_20151222_172527.jpg) And......Olhins ;D (http://s29.postimg.org/5u8wrrybb/amortisseur_ohlins_ducati_monster_ie.jpg) (http://s29.postimg.org/ia5mlirnb/amortisseur_ohlins_ducati_monster_ie2.jpg) And Downgrade for Showa for a new 1999 Monstro and fully adjustable, now I wait Brembo calipers. I make this change because I am not convinced by the look it gives to the bike. (http://img1.imagilive.com/1215/IMG_20151222_172611.jpg) (http://img1.imagilive.com/1215/IMG_20151224_142622.jpg) I also have this in machining to properly secure the front wheel (http://img1.imagilive.com/1215/entretoise_roue_avant.png) Title: Re: my M900 Post by: Froggy on December 30, 2015, 08:27:12 AM Nice job!
Et Belles routes par chez toi!! Title: Re: my M900 Post by: pepeducat on February 20, 2016, 12:24:28 PM I did lighten the gears of low engine jet cutting water
clutch side (http://s14.postimg.org/4vxvpqo6p/IMG_20160218_142852.jpg) alternator side (http://s8.postimg.org/6yusppck5/IMG_20160218_162628.jpg)(http://s8.postimg.org/3ta6zhtxx/IMG_20160218_162641.jpg) (http://s9.postimg.org/b3txy1nn3/IMG_20160218_165007.jpg) Title: Re: my M900 Post by: koko64 on February 20, 2016, 12:51:30 PM [thumbsup]
That should help the motor spin up! Title: Re: my M900 Post by: pepeducat on February 20, 2016, 01:19:34 PM Now there are no more than adjust the ignition, close the cover and alternator for a ride to try everything.
Title: Re: my M900 Post by: Speeddog on February 20, 2016, 01:46:30 PM [popcorn]
Title: Re: my M900 Post by: Graymonster on March 11, 2016, 07:11:50 AM [popcorn]
Title: Re: my M900 Post by: koko64 on March 12, 2016, 12:06:08 AM How did she run Pepe?
Title: Re: my M900 Post by: pepeducat on March 12, 2016, 12:17:47 AM http://www.youtube.com/watch?v=VcxjuAj7wMQ# (http://www.youtube.com/watch?v=VcxjuAj7wMQ#)
http://www.youtube.com/watch?v=U_7qOHf3kNk# (http://www.youtube.com/watch?v=U_7qOHf3kNk#) Title: Re: my M900 Post by: koko64 on March 12, 2016, 12:35:28 AM She is strong. :o
Title: Re: my M900 Post by: Howie on March 12, 2016, 03:41:03 AM Sounds like a beast! What part of France is that?
Title: Re: my M900 Post by: pepeducat on March 12, 2016, 02:20:57 PM Ardèche [thumbsup]
(http://img1.imagilive.com/0316/Capture_du_2016-03-12_231117.png) Title: Re: my M900 Post by: pepeducat on April 23, 2016, 10:38:23 PM Pulleys change (for KBike ergal) / belts / fixed wheels .....
(http://uploads.tapatalk-cdn.com/20160405/67f5f93ad0505628aaecdf785469f960.jpg) (http://uploads.tapatalk-cdn.com/20160405/58276621ea46cc17462858465175fdc2.jpg) (http://s24.postimg.org/mhzegmdxx/WP_20160406_006.jpg) Title: my M900 Post by: pepeducat on April 23, 2016, 11:04:22 PM MOTOGADGET [evil]
(http://s21.postimg.org/o34at0u3r/WP_20160415_001.jpg) (http://s3.postimg.org/7nnlo6ugz/WP_20160418_001.jpg) [roll] So I deleted the stand sensor, the oil pressure sensor (it will be replaced by that of motogadget), horn, brake switch and before the oil pressure light bulbs, stand, headlight, battery . (http://uploads.tapatalk-cdn.com/20160420/302246f5ffa023cca3ac03ef0adeb570.jpg) Green, all I have removed ;D (http://img1.imagilive.com/0416/IMG_20160424_084330.jpg) I removed the counter coach and cable (http://s21.postimg.org/rqmhmkgh3/WP_20160415_004.jpg)(http://s21.postimg.org/wf2hhr5nr/WP_20160415_005.jpg) And yet here I am ... test motogadget (http://www.youtube.com/watch?v=DazCc9bFhh8&feature=youtu.be#) Title: Re: my M900 Post by: pepeducat on April 24, 2016, 09:19:10 AM Connecting finished, ok test, remains to close the harness
motogadget mostro 900 (http://www.youtube.com/watch?v=j25b-37c_E0&feature=youtu.be#) Title: Re: my M900 Post by: koko64 on April 28, 2016, 03:32:23 PM Bravo [clap]
Any dyno charts? Title: my M900 Post by: pepeducat on August 06, 2016, 02:57:00 PM No dyno charts.....but it has nothing without a 900 character, became the devil [evil]
To cool this little world, an oil cooler SC-CONCEPT (https://s32.postimg.org/lnme1fh5h/IMG_0116.jpg) (http://uploads.tapatalk-cdn.com/20160806/9154de1e9f978a437d4588096320afe6.jpg) (http://uploads.tapatalk-cdn.com/20160806/d41e90d0fe5b37b7649e60bf912a55aa.jpg) (http://uploads.tapatalk-cdn.com/20160806/9fae6bcddbe82cbdf8bf4d3cc78121b2.jpg) Title: Re: my M900 Post by: Pinion on August 06, 2016, 06:49:12 PM Nice work. Have you tried any of the motogadget relays?
Title: Re: my M900 Post by: pepeducat on August 07, 2016, 12:01:48 AM M-unit?
Title: Re: my M900 Post by: DarkMonster620 on August 07, 2016, 04:56:17 AM how does the inregrity of the gears holds with those mods?
Title: Re: my M900 Post by: junior varsity on August 09, 2016, 04:47:15 PM Neat project!
Title: Re: my M900 Post by: pepeducat on January 11, 2017, 04:44:07 AM It's winter, so big winter work.
It's time for the dismantling of MOSTRO (https://c7.staticflickr.com/1/561/31344870094_4f09f9dc28_c.jpg) The exhaust manifold will have a small shot of polish (https://c4.staticflickr.com/1/693/32186122835_0965f2b786_c.jpg) The wheels will be sanded then painted in satin black and the bearings will be changed (https://c4.staticflickr.com/1/745/31375891523_f179d9acb4_c.jpg) The electrical circuit goes to the trash and will be replaced by a Munit MotoGadget (https://c3.staticflickr.com/1/488/31344915194_ec08db217b_c.jpg) (https://c8.staticflickr.com/1/506/31375948223_497a99577f_c.jpg) Dismantling the front axle (https://c2.staticflickr.com/1/739/32186231145_0504d2f97c_c.jpg) (https://c3.staticflickr.com/1/286/32148395746_bfae3ba12b_c.jpg) (https://c2.staticflickr.com/1/609/31400811193_8ca7ce22e3_z.jpg) (https://c2.staticflickr.com/1/758/32092567681_a43068aeb1_z.jpg) Frame came out and you can see the stop that was broken when I fell in 2016 ..... [bang] (https://c7.staticflickr.com/1/606/31835595990_bb2cc77af6_z.jpg) (https://c5.staticflickr.com/1/757/31369922204_c41c9b2424_z.jpg) And now disassembly finished .... (https://c7.staticflickr.com/1/260/32173128686_6b50911ed6_c.jpg) (https://c5.staticflickr.com/1/324/32062463212_26191de9fc_z.jpg) (https://c1.staticflickr.com/1/501/32062449472_96f9cd324b_z.jpg) Title: Re: my M900 Post by: koko64 on January 11, 2017, 08:29:16 AM [thumbsup] [popcorn]
Title: Re: Post by: greenohawk69 on January 11, 2017, 08:50:31 PM What front lift are you using?
Title: Re: my M900 Post by: pepeducat on January 11, 2017, 10:54:15 PM This
http://www.ricambiweiss.com/BEQUILLE/BEQUILLE-AVANT-/STFL-BEQUILLE-AVANT-UNIVERSELLE.html Title: Re: my M900 Post by: pepeducat on January 12, 2017, 12:41:25 PM Valve clearance ok [thumbsup]
(https://c1.staticflickr.com/1/754/32151887141_1fe909c15e_z.jpg) (https://c1.staticflickr.com/1/741/32151883531_9349e7421e.jpg)(https://c1.staticflickr.com/1/601/31461136343_564593cde5.jpg) (https://c1.staticflickr.com/1/473/31461142233_632c6c7f87_c.jpg) Title: Re: Post by: greenohawk69 on January 12, 2017, 04:36:15 PM Thanks.
Title: Re: my M900 Post by: pepeducat on March 13, 2017, 02:02:50 PM Work in progress
Modification frame 😎 (https://uploads.tapatalk-cdn.com/20170313/f15f2c6987783477ab3e208cfc682d04.jpg) (https://uploads.tapatalk-cdn.com/20170313/44e4559647630d8bdb98e38572c0089f.jpg) (https://uploads.tapatalk-cdn.com/20170313/2d22e3dca743413fcee12f7b39ad76cf.jpg) Title: Re: my M900 Post by: koko64 on March 13, 2017, 02:23:20 PM Interesting.
Title: Re: my M900 Post by: pepeducat on March 21, 2017, 02:24:06 PM Wiring harness and motogadget
(https://uploads.tapatalk-cdn.com/20170321/3d714b0a9a519cd01e3e97a110745ec2.jpg) (https://uploads.tapatalk-cdn.com/20170321/e34b1a1f9eac06591b4d4a19f04cbb25.jpg) (https://uploads.tapatalk-cdn.com/20170321/18667363883d999f1ad3ad7cc108c462.jpg) (https://uploads.tapatalk-cdn.com/20170321/72822f14776ff2679c63e9cfe168d1ab.jpg) (https://uploads.tapatalk-cdn.com/20170321/c806efbd279e68944a9cc26d8d163ded.jpg) Title: Re: my M900 Post by: ducatigirl100 on March 22, 2017, 03:40:39 AM I like the wiring... it always looks like that at that stage your on the rigth track....... [popcorn]
Also you may need to put a groud wire (AWG 14 size is ok)from one of the 2 bolts of the M-Unit to the frame.... the black wire that goes to the batery is not enough. Your m-unit seams to be bolted to a painted steel plate you sould be ok but just in case , the info may be ussefull.. [thumbsup] Epic job [thumbsup] Title: Re: my M900 Post by: Igor900 on March 22, 2017, 04:36:19 AM Nice. I just finished taking mine all apart last week. Waiting for the frame to be painted then I get to put it all back together slowly lol.
Good luck with the wiring. That's one thing that scares me with trying to work on. I can do all the mechanical stuff, but wiring just confuses the hell out of me. Title: Re: my M900 Post by: pepeducat on April 04, 2017, 09:18:37 PM @ducatigirl100 --------> I will put other larger mass cables connected to the frame of the motorcycle [thumbsup]
Igor900--------> It just needs to be well documented before you start and follow what some have already done and after all becomes simpler. Otherwise I have almost finished the electricity of the motorcycle and I will disassemble everything to send the frame and the wheels in paint. And I said goodbye to my Keihin FCR 39 ...... welcome Mikuni TDMR 40 (https://c1.staticflickr.com/3/2814/33720116351_e97e28f261_o.png) Title: Re: my M900 Post by: Speeddog on April 04, 2017, 10:50:18 PM Those TDMR's look the business.
Even better, they've got a choke circuit. 8) Title: Re: my M900 Post by: Duck-Stew on April 05, 2017, 05:25:00 AM All that Moto-Gadget goodness and no RFID key? ;)
Lookin' good and congrats on the rebuild... Title: Re: my M900 Post by: pepeducat on April 05, 2017, 08:23:14 AM Even better, they've got a choke circuit. 8) Actually the starter is a plus, but mostly they have a much better finish. Title: Re: my M900 Post by: pepeducat on April 13, 2017, 11:27:38 AM Paint return frame
(https://c1.staticflickr.com/3/2856/34011116195_7811bf1213_c.jpg) (https://c1.staticflickr.com/3/2885/34011105665_30473bb5a9_c.jpg) (https://c1.staticflickr.com/3/2895/34011084685_2a4e556863_c.jpg) (https://c1.staticflickr.com/3/2935/33853462572_54a3f40a5d_c.jpg) Motor cleaning (https://uploads.tapatalk-cdn.com/20170413/bd22af754b27d7648c4dae2cdfea6e9c.jpg) (https://uploads.tapatalk-cdn.com/20170413/349f78bd59bd2355016a19cc4ed11ca4.jpg) And reassembling the frame on the motor (https://uploads.tapatalk-cdn.com/20170413/98d6ff0d4ecf62ae7b1b198ff4141df9.jpg) New steering bearing and fork in place (https://c1.staticflickr.com/3/2876/33173749624_6110b685f8_c.jpg) (https://c1.staticflickr.com/3/2813/33204381623_01b6e88809_c.jpg) And the Ohlins [evil] (https://c1.staticflickr.com/3/2939/33887335381_3f990e8970_c.jpg) (https://c1.staticflickr.com/3/2843/33859674562_c3ff047129_c.jpg) (https://c1.staticflickr.com/3/2892/33859668302_d179de95f2_c.jpg) Title: Re: my M900 Post by: pepeducat on April 16, 2017, 10:59:56 AM Carburettor in place
(https://c1.staticflickr.com/3/2896/33879541132_fe7150f63e_c.jpg) (https://c1.staticflickr.com/3/2903/33193828634_9b4c1f7f1a.jpg)(https://c1.staticflickr.com/3/2901/33193854734_18b2f93fb0.jpg) (https://c1.staticflickr.com/3/2858/33211254034_71383fb8b8_c.jpg) (https://c1.staticflickr.com/3/2879/33211248794_f72e0c493a_c.jpg) (https://c1.staticflickr.com/3/2949/33896794312_b3d5c6bfbb_c.jpg) (https://c1.staticflickr.com/3/2846/33211237904_50fa24cc65_c.jpg) KN pods (https://c1.staticflickr.com/3/2828/34013259426_1c090f8474_c.jpg) (https://c1.staticflickr.com/3/2889/34013245366_cf7f7ffe41_c.jpg) (https://c1.staticflickr.com/3/2940/34053594125_f6f61a860d_c.jpg) Title: Re: my M900 Post by: koko64 on April 16, 2017, 11:42:55 AM [thumbsup]
Title: Re: my M900 Post by: Howie on April 16, 2017, 05:13:26 PM Oolala!
Title: Re: my M900 Post by: pepeducat on April 17, 2017, 09:37:08 AM Laser cutting of an aluminum support for the meter Motogadget
(https://c1.staticflickr.com/3/2864/33662686410_d0cfc360dc_c.jpg) And mounting (https://c1.staticflickr.com/3/2926/33236753253_a860be2c4c_c.jpg) (https://c1.staticflickr.com/3/2930/33891648512_9f12c9971d_c.jpg) Title: Re: my M900 Post by: Duck-Stew on April 17, 2017, 11:49:47 AM Mucho nice! ;D
Title: Re: my M900 Post by: pepeducat on April 17, 2017, 12:00:57 PM thank you 🙏
Title: Re: my M900 Post by: DucHead on April 17, 2017, 12:06:47 PM Fantastic job!
I love the Motogadget goodness, but second Stew's query regarding the Motogadget RFID. ;D [bacon] Title: Re: my M900 Post by: koko64 on July 23, 2017, 10:28:03 AM How's it goin' Pepe? [popcorn]
Title: Re: my M900 Post by: Pinion on July 24, 2017, 02:36:13 AM Looking great
Sent from my iPhone using Tapatalk Title: Re: my M900 Post by: pepeducat on July 26, 2017, 01:46:35 PM Finish
(https://uploads.tapatalk-cdn.com/20170726/cbda49b288b092309091dc3dc82db964.jpg) (https://uploads.tapatalk-cdn.com/20170726/477cd26dddafe331fefbfd2259b2a90f.jpg) (https://uploads.tapatalk-cdn.com/20170726/2a3c4e2962e9bf2d53182c7ec7bad854.jpg) (https://uploads.tapatalk-cdn.com/20170726/19b1ef8de10c9a677a9698429e23e271.jpg) (https://uploads.tapatalk-cdn.com/20170726/aa9b0a02e83462874022484cf57712a5.jpg) Title: Re: my M900 Post by: kopfjäger on July 26, 2017, 07:33:36 PM Nice [thumbsup] 8)
Title: Re: my M900 Post by: koko64 on July 26, 2017, 08:55:57 PM Bravo [clap]
Title: Re: my M900 Post by: Howie on July 26, 2017, 10:03:49 PM Ooh la la [thumbsup]
Title: Re: my M900 Post by: pepeducat on December 03, 2017, 12:32:35 AM I put it on my Mostro, Matris steering damper
(https://farm5.staticflickr.com/4361/36963595501_a72c34c931_c.jpg) (https://farm5.staticflickr.com/4426/36708987530_9a3cf1d0e4_c.jpg) (https://farm5.staticflickr.com/4407/36963557941_49b953e35f_c.jpg) (https://farm5.staticflickr.com/4369/36963560941_dabfd88ba1_c.jpg) So it rolls like this http://vimeo.com/225586581 Then I just bought adjustable pulleys to better adjust the cam timing original pulleys (https://farm5.staticflickr.com/4567/23926309977_d583e5b9c7_z.jpg) pulley Kbike (https://farm5.staticflickr.com/4561/23926318787_93818b17a0_z.jpg) the tools (http://preview.ibb.co/fx1zxb/d.jpg) and the tutorial -----------> http://ducati-mostro-forum.fr/index.php?topic=3742.0 And I upgraded the brakes (https://uploads.tapatalk-cdn.com/20171125/58aa4bac43f7c5dad2a1e9e8d2df9f4f.jpg) (https://uploads.tapatalk-cdn.com/20171125/72089580627fa9ece5049b7ddb48d651.jpg) Title: Re: my M900 Post by: koko64 on December 03, 2017, 01:45:34 AM [drool]
Title: Re: my M900 Post by: GK on December 03, 2017, 02:17:07 AM Looks great!
You were clearly having a ball on that ride! 👍🏻👍🏻 Title: Re: my M900 Post by: Howie on December 03, 2017, 04:21:52 AM I do like that bike!
Title: Re: my M900 Post by: pepeducat on May 31, 2018, 02:45:52 PM This winter I was a little bored so I opened the engine of the monster
(https://farm1.staticflickr.com/819/41214438761_1a2690a7b4_c.jpg) After two hours ...... (https://farm1.staticflickr.com/873/41214260621_d2d8bea39d_c.jpg) (https://farm1.staticflickr.com/889/39403670380_0094a76760_c.jpg) (https://farm1.staticflickr.com/880/39403679140_6b5c703020_c.jpg) (https://farm1.staticflickr.com/902/27340066018_412381cd6a_c.jpg) That's what I'm grafting on him -------> a lightened and balanced crankshaft coming from Kaemna, a pair of Carrillo rods, a 944 Pistal kit and ST2 camshafts that I will rig up to 106 °. (https://farm5.staticflickr.com/4777/27052200478_2ab2aef8b7_c.jpg) Comparison of old and new crankshaft and connecting rod assembly (https://farm1.staticflickr.com/902/40340700165_24bf588476_c.jpg) (https://farm1.staticflickr.com/865/40522475014_d1d0ef942b_c.jpg) Title: Re: my M900 Post by: pepeducat on May 31, 2018, 02:49:50 PM Then I reassembled the engine with all the bearings and pads new and all stalled as it must be done
(https://farm1.staticflickr.com/886/41316418671_d99bbf285d_c.jpg) (https://farm1.staticflickr.com/789/27444793298_c84e7e535c_c.jpg) (https://farm1.staticflickr.com/796/40603135874_93fdf618b8_c.jpg) (https://farm1.staticflickr.com/795/39506998460_6d1e50e5de_c.jpg) (https://farm1.staticflickr.com/806/39506990640_17403acb62_c.jpg) (https://farm1.staticflickr.com/893/27444362248_b56848c63e_c.jpg) (https://farm1.staticflickr.com/866/27444355878_bd31852bed_c.jpg) Title: Re: my M900 Post by: pepeducat on May 31, 2018, 02:55:24 PM Then I mounted the kit 944 pistal
(https://farm1.staticflickr.com/802/40450558975_74bd7b649a_c.jpg) (https://farm1.staticflickr.com/896/40632434684_a4d14121ff_c.jpg) (https://farm1.staticflickr.com/878/40632427264_c90cf248dc_c.jpg) (https://farm1.staticflickr.com/794/26474699907_5aa5a63e3a_c.jpg) (https://farm1.staticflickr.com/891/26474708667_f7fe1d6067_c.jpg) I cleaned the cylinder heads (https://farm1.staticflickr.com/808/26474693287_0edaf8686b_c.jpg) And prepare what is needed for mounting ST2 camshafts (https://farm1.staticflickr.com/888/39537970850_55b4c266e4_c.jpg) Title: Re: my M900 Post by: Speeddog on May 31, 2018, 03:02:46 PM [popcorn]
Title: Re: my M900 Post by: pepeducat on May 31, 2018, 03:04:12 PM Assembly of the cylinder heads and setting of the camshafts
(https://farm1.staticflickr.com/863/26523134187_d25f86bac8_c.jpg) (https://farm1.staticflickr.com/887/40679662914_268b8e8b7b_c.jpg) And reassembling in the bike (https://farm1.staticflickr.com/870/40732843454_b3e27be90f_c.jpg) (https://farm1.staticflickr.com/809/41447185041_dffc9fbd6e_c.jpg) Today I traveled 2000 kms with this new engine, it's pure bliss, a real muscular motorbike https://youtu.be/P61faYD7w10 (https://farm1.staticflickr.com/798/40714045175_197d788877_c.jpg) (https://farm1.staticflickr.com/787/40714045615_ab9540ed63_c.jpg) (https://farm1.staticflickr.com/930/41605405001_58c7bfe24d_c.jpg) Title: Re: my M900 Post by: koko64 on May 31, 2018, 03:28:06 PM [thumbsup] Much more torque?
How are the TDMR40's? Title: Re: my M900 Post by: GK on June 01, 2018, 01:20:09 PM Great stuff.
Title: Re: my M900 Post by: DucHead on June 01, 2018, 03:27:51 PM Wow, fantastic!!
Title: Re: my M900 Post by: koko64 on June 02, 2018, 02:33:53 AM What is it about the TDMR40's that you prefer compared to FCR39's?
Title: Re: my M900 Post by: pepeducat on June 06, 2018, 01:48:46 PM manufacturing quality, settings and choke.
Title: Re: Re: my M900 Post by: pepeducat on June 06, 2018, 01:50:52 PM [thumbsup] Much more torque? Equivalent to Keihin FCR 41, but more stable in settingsHow are the TDMR40's? Title: Re: my M900 Post by: pepeducat on June 06, 2018, 01:55:13 PM spring wash
(https://uploads.tapatalk-cdn.com/20180606/cf5eaa16dfcc08d4cb7e128065ee9ee3.jpg) (https://uploads.tapatalk-cdn.com/20180606/0da81de1adae34bfec058e011017a03a.jpg) (https://uploads.tapatalk-cdn.com/20180606/e0b4856803b8a93856cbeff4ce4312ab.jpg) (https://uploads.tapatalk-cdn.com/20180606/c5f44208782f354b8cf37196cac4d9f8.jpg) Title: Re: my M900 Post by: pepeducat on August 01, 2018, 09:07:10 AM Upgrade front brake [evil]
These are Performance Technology (same brand as my master brake and clutch cylinders). They are cut one-piece with titanium pistons of 32/36 diameter. They are 4 platelets like the P4 34/34. (https://farm2.staticflickr.com/1792/43712019782_e1696c19b2_c.jpg) (https://farm2.staticflickr.com/1794/43712019752_26a49f6b1e_c.jpg) (https://farm1.staticflickr.com/930/28823971897_cbee6774d0_c.jpg) On the bike (https://farm1.staticflickr.com/935/43712223982_bd78afcbac_c.jpg) Title: Re: my M900 Post by: silas on August 01, 2018, 04:54:03 PM awesome bike. and you dont stop making it better! ne touche pas. [thumbsup] [beer]
Title: Re: my M900 Post by: pepeducat on August 01, 2018, 11:38:24 PM Thank you, but it's not over because we'll have to review the rear brakes now ;D
Title: Re: my M900 Post by: koko64 on August 02, 2018, 02:43:22 AM Bravo [clap]
Title: Re: my M900 Post by: stopintime on August 02, 2018, 03:12:21 AM That's 40mm spacing?
Do they make 65? Title: Re: my M900 Post by: pepeducat on September 08, 2018, 10:44:34 AM 40mm spacing [thumbsup]
A climb of Mont Ventoux (http://ducati-mostro-forum.fr/uploads/member_1/1536302545.jpg) (https://farm2.staticflickr.com/1871/42685683840_02c218a8e4_o.png) (https://farm2.staticflickr.com/1848/44445489942_09b193e447_c.jpg) (https://farm2.staticflickr.com/1862/42686009240_665849aa14_c.jpg) Title: Re: my M900 Post by: koko64 on September 08, 2018, 02:25:50 PM [thumbsup]
Title: Re: my M900 Post by: pepeducat on October 02, 2018, 12:46:24 PM currently she is like that
(https://uploads.tapatalk-cdn.com/20181002/da4521af51e5247aefd23e4a52a7bfec.jpg) but I am weak and I cracked ..... AEM triple clamp (https://uploads.tapatalk-cdn.com/20181002/eddd6d0344de5705cf86b19e6de5a1ee.jpg) Title: Re: my M900 Post by: stopintime on October 02, 2018, 12:59:13 PM It's not weakness, it's better for safety [thumbsup]
Title: Re: my M900 Post by: pepeducat on October 02, 2018, 01:09:50 PM 😬👍
Title: Re: my M900 Post by: koko64 on October 02, 2018, 01:13:30 PM ;D
Title: Re: my M900 Post by: pepeducat on March 17, 2019, 01:21:18 PM (https://uploads.tapatalk-cdn.com/20190317/72d547fe16313e4489c2505fd402a332.jpg)
(https://uploads.tapatalk-cdn.com/20190317/361655550ac3ae45e6ceec82c10d0569.jpg) (https://uploads.tapatalk-cdn.com/20190317/130404ca88a05f072879af3db7860cc9.jpg) Title: Re: my M900 Post by: greenmonster on March 18, 2019, 05:27:31 AM [thumbsup]
Title: Re: my M900 Post by: Mhanis on March 18, 2019, 06:00:25 AM Fantastic!
Mark Title: Re: my M900 Post by: pepeducat on October 09, 2019, 10:08:20 PM Small video made by a friend this weekend in the Gorges de l'Ardèche in France
https://youtu.be/04HeOIm6q7Q Title: Re: my M900 Post by: stopintime on October 10, 2019, 12:59:45 AM [clap] [bow_down]
Really cool 8) Title: Re: my M900 Post by: koko64 on October 10, 2019, 02:26:59 AM [thumbsup] bravo.
Title: Re: my M900 Post by: pepeducat on November 24, 2019, 12:17:17 AM Thanks Pinion [beer]
(http://ducati-mostro-forum.fr/uploads/member_1/1574523039.JPG) Title: Re: my M900 Post by: koko64 on November 24, 2019, 04:26:44 AM Instead of the spaghetti system!
Title: Re: my M900 Post by: pepeducat on November 30, 2019, 07:13:38 AM My spaghetti exhaust manifold is in diameter 40/35 and with the engine configuration that I currently have and the limits are too quickly found.
(https://uploads.tapatalk-cdn.com/20191130/1bba46b87d5bd1ade581a86c466b9875.jpg) Title: Re: my M900 Post by: koko64 on November 30, 2019, 08:28:14 AM Is the 2 into 1 a 45mm diameter? Maybe add a second muffler like an 1100Evo style with 50mm junction?
Title: Re: my M900 Post by: pepeducat on November 30, 2019, 10:20:55 AM 45/45 and junction 54 ;)
I'm going to keep this exhaust muffler but I'm going to change the junction between him and the exhaust manifold. The picture I put is just a blank montage to ride with the bike. I really feel better at the top, it does not fade anymore and pulls much better. I find myself with two exhaust pipes not found, I really hesitate to sell or keep the spaguetti. or I expose it in my garage ;D Title: Re: my M900 Post by: koko64 on November 30, 2019, 11:47:36 PM ;D [thumbsup]
Title: Re: my M900 Post by: pepeducat on December 03, 2019, 11:47:30 AM cleaning and temporary assembly because I will redo the collector / muffler junction
(http://ducati-mostro-forum.fr/uploads/member_1/1575325390.JPG) (http://ducati-mostro-forum.fr/uploads/member_1/1575325461.JPG) (http://ducati-mostro-forum.fr/uploads/member_1/1575325623.JPG) (http://ducati-mostro-forum.fr/uploads/member_1/1575325625.JPG) (http://ducati-mostro-forum.fr/uploads/member_1/1575326095.JPG) Title: Re: my M900 Post by: koko64 on December 03, 2019, 12:03:58 PM Shiney :D
Title: Re: my M900 Post by: l88m22vette on December 04, 2019, 06:30:15 PM That pie cleaned up really nice, that orange is so nice!
Title: Re: my M900 Post by: koko64 on December 25, 2019, 05:24:40 AM Any updates? Merry Christmas btw [beer]
Title: Re: my M900 Post by: pepeducat on December 30, 2019, 01:29:11 PM no update for the moment, I'm waiting at the end of January to go see the welder to modify the collector / muffler junction and repair my old spaghetti collector which was damaged when it went back to the mufflers.
and happy New Year Title: Re: my M900 Post by: koko64 on December 30, 2019, 09:12:50 PM [beer]
Title: Re: my M900 Post by: Pinion on May 09, 2020, 06:23:36 PM Thanks Pinion [beer] (http://ducati-mostro-forum.fr/uploads/member_1/1574523039.JPG) Your welcome, lol, didn’t even see this before. Bike is looking great Title: Re: my M900 Post by: MonsterHPD on May 14, 2020, 01:19:11 AM Nice job on that bike [thumbsup]
Title: Re: my M900 Post by: pepeducat on May 18, 2020, 08:16:47 AM News from my motorbike ..... I have cervical problems and I'm going to have an operation .... I talked to the surgeon and he told me that I could take the motorbike back, but no longer with the clipons .
So I ordered from AEM Factory the triple trees for mounting with handlebars like Pinion -----> Look what I found in the shed (http://www.ducatimonsterforum.org/index.php?topic=77755.msg1433542#msg1433542) So I will have to rewire the Motogadget buttons. I made a provisional assembly time to receive the new handlebars as well as the Andreani fork cartridges. So at the moment I'm there (https://live.staticflickr.com/65535/49909478521_ccd143d157_c.jpg) (https://live.staticflickr.com/65535/49908963783_8391b341c6_c.jpg) Title: Re: my M900 Post by: koko64 on May 18, 2020, 01:00:43 PM Glad you're felling better Pepe [thumbsup]
Look like1100 bars. Title: Re: my M900 Post by: pepeducat on June 18, 2020, 10:49:53 AM Work in progress......
(https://i.postimg.cc/TPBcw6wv/293-EA3-AC-9489-457-C-9-D5-B-B0-F428315-E71.jpg) (https://i.postimg.cc/zXdKvrt2/7-F22-EFE4-7-DFE-418-F-B6-CA-9-E57-FFF881-B8.jpg) (https://i.postimg.cc/gkc3GJD6/A75-FD6-DF-83-F5-4437-B9-A2-825-FFD0-D4594.jpg) (https://i.postimg.cc/tRNh0Phj/E1-E41-AAD-E76-D-4-B95-BCD9-12273-E160-CE8.jpg) Title: Re: my M900 Post by: Duck-Stew on June 18, 2020, 02:33:50 PM Awesome...
Title: Re: my M900 Post by: pepeducat on June 18, 2020, 11:55:52 PM New Motogadget Mo-Unit Blue and Mo-Lock
(https://i.postimg.cc/tChDbDVB/39-A8-F2-EE-8690-4-AEC-B289-428-C0-B4645-EF.jpg) (https://i.postimg.cc/L4gNCm4K/926-A1-BB7-BD63-431-B-BEC2-81-BBB6-D5700-C.jpg) Title: Re: my M900 Post by: koko64 on June 20, 2020, 03:25:14 AM [thumbsup] :D
Title: Re: my M900 Post by: Duck-Stew on June 20, 2020, 03:57:24 AM Your M900 is gorgeous... [bow_down]
Title: Re: my M900 Post by: pepeducat on September 03, 2020, 10:51:21 AM Tadam !!!!!
https://youtu.be/S8M9Y3cRNAg (https://i.postimg.cc/7PCDc4KQ/0-DFECA0-B-40-D8-4-C82-80-B6-33-D70-EB8896-A.jpg) (https://i.postimg.cc/SNC4SrF6/74-FCF792-F11-A-4-F33-B24-D-3-C9-E550-E3-F1-F.jpg) (https://i.postimg.cc/pVgxMS7V/8-C48-E327-0-BAE-4692-8-CE7-F538-F136-AE9-B.jpg) Title: Re: my M900 Post by: MonsterHPD on September 03, 2020, 09:12:28 PM Really nice [thumbsup]
Title: Re: my M900 Post by: Duck-Stew on September 04, 2020, 04:17:12 AM That’s what an M900 aspires to! Beautiful!!!
Title: Re: my M900 Post by: Howie on September 04, 2020, 04:57:22 AM [thumbsup] [clap] [clap] [clap] [clap] [clap] [clap] [clap]
Title: Re: my M900 Post by: Jaman on September 04, 2020, 08:16:46 AM BeeYoooTeeFull!! [thumbsup]
Title: Re: my M900 Post by: kopfjäger on September 04, 2020, 08:13:06 PM [evil]
Title: Re: my M900 Post by: silas on February 05, 2021, 11:28:45 AM Amazing, Pepe! very clean front end-black bars look great !
Title: Re: my M900 Post by: pepeducat on May 04, 2021, 11:30:50 PM A little bit of news, anodizing the fork, fitting OZ forged wheels and black BREMBO oro brake discs.
(https://i.postimg.cc/Qdt6bzFr/518-B0294-33-EA-414-A-8-E8-A-A790-B4-B19383.jpg) (https://i.postimg.cc/nhP3w1m9/6610-F0-A3-C8-D2-478-D-B827-7-A4-F7-C064-E46.jpg) (https://i.postimg.cc/25L0pBdc/FBB6340-A-B948-4-BB8-8433-ACA6652-C5-CAE.jpg) (https://i.postimg.cc/4ysPhLDq/IMG-0464.jpg) (https://i.postimg.cc/yxjPhhBd/IMG-0468.jpg) (https://i.postimg.cc/ryNQLTWk/IMG-0431.jpg) (https://i.postimg.cc/NfGbsn7r/IMG-0432.jpg) Title: Re: my M900 Post by: koko64 on May 05, 2021, 12:31:33 AM Bravo.
More [popcorn] Title: Re: my M900 Post by: pepeducat on May 09, 2021, 10:30:37 AM (https://i.postimg.cc/cCJDJ3xy/IMG-0494.jpg)
(https://i.postimg.cc/Y0ydLS04/IMG-0500.jpg) (https://i.postimg.cc/Y9RnkRwz/IMG-0503.jpg) Title: Re: my M900 Post by: koko64 on May 09, 2021, 11:27:50 AM The bike must feel very light.
The rear brake must be strong now? 4 piston caliper? Title: Re: my M900 Post by: pepeducat on May 12, 2021, 12:23:39 AM In fact, it has become quite light and very pleasant to drive, even astonishing.
The rear brake caliper is a 4 piston DISCACCIATI and now it brakes correctly, see too much if you are not careful. Title: Re: my M900 Post by: buzzer on May 12, 2021, 05:02:47 AM brilliant! love the colours!
Title: Re: my M900 Post by: pepeducat on May 12, 2021, 10:48:32 AM My friend who paints my motorcycles for me is going to redo a front mudguard and then he will make me a black tank + seat cowl + front mudguard set in the same style as the yellow one.
Then they just gave me an M900 frame with the registration papers and seen all the parts I have aside I think I'll get one to go to work. Title: Re: my M900 Post by: diamonddog-2 on May 26, 2021, 09:18:40 AM Just ........ wow.
Title: Re: my M900 Post by: koko64 on May 26, 2021, 09:32:19 AM My friend who paints my motorcycles for me is going to redo a front mudguard and then he will make me a black tank + seat cowl + front mudguard set in the same style as the yellow one. Then they just gave me an M900 frame with the registration papers and seen all the parts I have aside I think I'll get one to go to work. Bravo. Encore please. [popcorn] Title: Re: my M900 Post by: Howie on May 26, 2021, 10:43:45 AM Incredible job! [thumbsup]
Title: Re: my M900 Post by: pepeducat on December 20, 2021, 10:51:57 AM It's been riding for some time and it's a really great bike
(https://i.ibb.co/8MVdPK1/26.jpg) (https://i.ibb.co/NVYdkSh/23.jpg) Title: Re: my M900 Post by: stopintime on December 20, 2021, 03:07:27 PM Beautiful [Dolph]
Will you be going to the WDW next year? Drinks on me [wine] Title: Re: my M900 Post by: pitbull on December 23, 2021, 05:10:13 AM Really nice work. Looks fantastic!
Title: Re: my M900 Post by: koko64 on January 13, 2022, 07:57:22 AM Happy New Year Pepe. [beer]
Any more updates? Title: Re: my M900 Post by: pepeducat on January 13, 2022, 11:25:07 AM Ho ho ho
Happy new year Koko [beer] (https://i.postimg.cc/kGQNjzRK/IMG-1468.jpg) I am going to build a new engine for a new monster. Motorcycle intended to do a bit of everything, go to work, take a walk with my wife, travel nomadically and do the French road rally championship The yellow I roll everywhere in France and Europe between two covid ;D I will have a specific support for the rear brake caliper machined for the yellow one soon. (https://i.postimg.cc/Pfwwzg1R/IMG-1447.jpg) Title: Re: my M900 Post by: koko64 on January 13, 2022, 01:45:47 PM We'll be watching :)
Title: Re: my M900 Post by: koko64 on February 02, 2022, 11:34:13 AM Hi Pepe
What specification for the new bikes motor? Compression ratio, carburettors, ignition, cams and valves? Also what are your plans for the wheels, suspension and chassis? Are you planning a scrambler style for the rally? Title: Re: my M900 Post by: pepeducat on February 14, 2022, 04:49:45 AM For the engine it is being assembled here ----> https://youtube.com/playlist?list=PL8jUh3OAfZPIcYRdy7TRCgHfbCMP96LS8
For the engine specifications, nothing very complicated, Ducati 900SSie camshafts, 1mm squish, "cleaned" cylinder heads, all properly mounted, aiming for the highest possible compression ratio with the original pistons. At the exhaust I will make a homemade 2/1 For ignition, an ignitech box with shifter and IAP sensor. And finally for the carburetor I will put a single carburetor, a Mikuni HSR45 [evil] For the "look" I no longer think from a monster but rather from a 900 supersport frame from 1994 that I amputated to keep only the front. 900 monster fork modified with a classic swingarm with two shock absorbers. A large handlebar for maneuverability, DUCATI 800 scrambler wheels. Here's a bit of an outline ;D Title: Re: my M900 Post by: koko64 on February 14, 2022, 11:39:08 AM A very interesting project [thumbsup].
Are you making your own 2 into 1 manifold or is there a manifold kit with the HSR? Pepe design for frame, sub frame and twin shock swingarm sounds very interesting. Anticipating a report with pictures. ;D Title: Re: my M900 Post by: pepeducat on February 16, 2022, 10:00:59 AM Nothing exists, I'm going to make everything, it will be long but good ;D
Obviously there will be plenty of photos [beer] Title: Re: my M900 Post by: koko64 on February 21, 2022, 09:43:55 AM Look forward to it.
A few years ago, before Covid, I was talking to someone who wanted to use a HSR 42 carb on a 2 into 1 manifold on a 900 desmodue. They were looking for an affordable option to the very expensive Keihin FCR carbs. I don't think they ever finished the project. It will be great to see how you fabricate a solution for the manifold. Title: Re: my M900 Post by: pepeducat on February 24, 2022, 08:49:17 AM I plan to start with two original intake pipes then two rubber sleeves then the rest will be a prototype in 3D printing and machining to finish
Title: Re: my M900 Post by: koko64 on February 24, 2022, 12:53:31 PM Looking forward to seeing your solution. [beer]
Title: Re: my M900 Post by: pepeducat on February 25, 2022, 10:48:46 AM the idea is to make a Harley Davidson type assembly
Title: Re: my M900 Post by: pepeducat on April 16, 2022, 11:23:23 AM Good annual wash ;D
(https://i.postimg.cc/8kFFqjTt/2-A1-C9135-82-C9-43-F6-AC38-60-B6-D2191-BCE.jpg) Here it is clean [drink] (https://i.postimg.cc/NFb0vqPq/IMG-2354.jpg) (https://i.postimg.cc/GtpCYBzV/IMG-2346.jpg) So this afternoon I went dirty by my house, it's worth two turns of the Parisian ring road no more....... Road Book (https://goo.gl/maps/YtPr59SoJDjvHKuR7) (https://i.postimg.cc/LXwcqyYY/Capture-d-cran-2022-04-16-20-20-13.png) And then the souvenir photo [beer] (https://i.postimg.cc/qvKzgYNn/gard.jpg) Title: Re: my M900 Post by: Jaman on April 19, 2022, 12:24:18 PM [Dolph][thumbsup]
Title: Re: my M900 Post by: Howie on April 19, 2022, 02:13:27 PM Love the license plate.
Title: Re: my M900 Post by: pepeducat on April 20, 2022, 09:51:53 AM I love Mickey ;D
Title: Re: my M900 Post by: pepeducat on September 10, 2022, 09:45:32 AM I mounted a wide band lambda probe with an Innovates Motorsport display to correctly adjust the carburation of the monster.
(https://i.postimg.cc/QtZx7xgW/IMG-3072.jpg) I welded a tapping to mount the probe (https://i.postimg.cc/7YK6R44p/IMG-3082.jpg) I printed a support in ABS (https://i.postimg.cc/5tC2jFzV/IMG-3075.jpg) (https://i.postimg.cc/Jzgh1QGx/IMG-3078.jpg) And finally assembly on the motorcycle (https://i.postimg.cc/SxjsFPNj/IMG-3080.jpg) Title: Re: my M900 Post by: koko64 on September 10, 2022, 11:28:28 AM Excellent! [beer]
Your tuning data will be valuable for the TDMR40. I hear rumours that Keihin has scaled back carburettor production and planning to cease all carburettor production. Therefore the Mikuni TDMR40 will be the only downdraught carb tuning option besides oem. |