Ducati Monster Forum

Moto Board => Tech => Topic started by: Kikev on December 14, 2013, 11:21:14 PM

Title: Custom powercommander map for 796abs termi slip request
Post by: Kikev on December 14, 2013, 11:21:14 PM
Hello fellow members here's my first post and it's a request, I just bough a 2011 monster 796abs. But I have two big issues, the first one it's this bike has a power commander V with optimizer, termignoni slip ons, dp ecu, performance air filter, mwr power up filter. The thing is the map in the PCV it's the Leo Vince one on the site, but it runs like crap, I now I need to Dino or a autotune, but mi nearest Dino it's 400miles and the auto tune it's order, my request goes to anyone with a similar configuration. To share me his map to test this monster, until I get and install the AT. I will really appreciate your help.
You can shoot me that map to this email
enriquevazquezdelm (at.)hotmail dot com
Thank you

Title: Re: Custom powercommander map for 796abs termi slip request
Post by: ungeheuer on December 15, 2013, 02:13:08 AM
Welcome.

http://www.ducatimonsterforum.org/index.php?topic=111.0 (http://www.ducatimonsterforum.org/index.php?topic=111.0)

Title: Re: Custom powercommander map for 796abs termi slip request
Post by: Kikev on December 17, 2013, 05:36:05 PM
well i just order my auto tune so i will share whatever it creates
Title: Re: Custom powercommander map for 796abs termi slip request
Post by: DarkMonster620 on December 17, 2013, 05:47:23 PM
I always when possible recommend a dyno tune . . . if you are close, go to Houston Superbikes . . .or Ducati San Antonio . . .
Title: Re: Custom powercommander map for 796abs termi slip request
Post by: ungeheuer on December 17, 2013, 05:55:35 PM
What your Autotune "creates" depends entirely on what AFR tables you feed it.

Here's a link to the AFR table I settled on and which works well on with my PCV+Autotune M1100s

https://docs.google.com/file/d/0B8GYk44zAjpmZGRiZjJkZmItZTIyZC00MTkzLTlkZjAtNjRhYTliOTA0ZTYy/edit?hl=en_GB&pli=1 (https://docs.google.com/file/d/0B8GYk44zAjpmZGRiZjJkZmItZTIyZC00MTkzLTlkZjAtNjRhYTliOTA0ZTYy/edit?hl=en_GB&pli=1)

You're having your ECU reflashed to delete closed loop?

So that your Autotune wideband O2 sensors can:

1) live in where the stock O2 sensors are currently situated.
2) control fuelling over the entire rev range.

Title: Re: Custom powercommander map for 796abs termi slip request
Post by: Kikev on December 18, 2013, 08:30:16 AM
thanks for the reply im not currently in US i`m in mexico, so no dyno around here,  i will look into the AFR table and more into this, and i suspect my ecu is flashed because it has a different sticker on top, the oem has been removed and supplied with on hand numbers, when you turn on the monster, it scrolls M 796 ABS DP so mi guess it's flashed, i don't fully know because i don't have all the history to this motorcycle, i'm the second owner and the guy i purchase from did not know a lot from it so my guess the first owner did all the upgrades. it also has a O2 optimizer plugged in, i will try to remove the stock sensor and go from there 
Thanks again for the reply!!