Hi there,
I just changed my rear wheel on my EVO. After putting the wheel back and setting the torque, i put the clip back on. What kind of wire or fastener do people us to tie the clip together? There was a thin wire that came from the factory. Is there anything else people use?
I would guess that the wire was there so that they knew that the fastener had been torqued. They normally use a spot of paint for that purpose, butt that would be less than desirable in this instance, I would think.
I have never seen safety wire used in that spot, but if you wanted a belt with your suspenders some standard stainless safety wire would be my choice.
I use a zip tie [thumbsup]
+1 for the zip tie. Check it every time I ride though as they can get brittle after lots of exposure to the elements.