I have a spare frame that's from a 2000 M600 and it's Australian registered (WA).
What engine/suspension set ups can I use?
My understanding is any 2V engine and duel swingarm set up will be ok?
this,
(https://scontent-a-mia.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10488262_853908174660378_4251304695772182247_n.jpg?oh=7b09e25d67b1308e11677e8378c06eff&oe=5564198E)
or
(https://scontent-b-mia.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10805856_854920764559119_2300469187075060159_n.jpg?oh=2e54ed9248ddb8b4fcaa3afbacbb3bdb&oe=5565806C)
or
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10846242_857919800925882_3157483789425470130_n.jpg?oh=55eee5f0cb6d9d4f8a1f80edf932393f&oe=55663AD7&__gda__=1433019494_c32b9d6202e32bd5107d514bf454c70c)
or get one of these,
(https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcRNqqUimsOClqi4qSuRAZ8gkI6vH0FlweGVW2cp8WkezxQOvtWe) into it . . .
I'm almost sure it's a 10mm engine bolt so any engine 600/750/900 should fit until 2000 . .
sell it to me.
Quote from: brad black on January 17, 2015, 08:45:13 PM
sell it to me.
Make me a sensible offer and I might consider it!
Quote from: MonsterMadMarty on January 17, 2015, 05:21:41 PM
I have a spare frame that's from a 2000 M600 and it's Australian registered (WA).
What engine/suspension set ups can I use?
My understanding is any 2V engine and duel swingarm set up will be ok?
As far as bolt'n'go;
2V carbie engines 2000 and prior.
Rear suspension, Monsters 2001 and prior except 2001 S4.
If you're going to cut and weld and fabricate, pretty much anything....
sorry, you'll get nothing sensible out of me. [laugh]
i realised all i'd have to go with it is some forks and triple clamps and possibly an engine. sort of leaves a fair bit more to find.
and i have absolutely no idea what i'd do with it anyway.