|
Title: mivv high mount install Post by: darksouls on April 24, 2015, 02:10:05 PM Ok so i got ducabike rearsets on the 620 monster, thinking i needed high mounts for the rearsets. I got the carbon oval mivvs high and the instructions show to mount to the stock rearsets. [bang] any ideas where to mount them on the frame? I thought of making some brackets that clamp to the pass. grab bars, but i figured i'd check here first. Thanks guys!
Title: Re: mivv high mount install Post by: stopintime on April 24, 2015, 03:19:34 PM If the mounting straps reach high enough, something like this?
http://www.desmoworld.com/shop/ducati-monster/s4-m620i-e-m1000i-e/auspuff/auspuff/spark-halteschellen.html (http://www.desmoworld.com/shop/ducati-monster/s4-m620i-e-m1000i-e/auspuff/auspuff/spark-halteschellen.html) Probaly cheaper generic hardware to get, but this just as an idea.. Title: Re: mivv high mount install Post by: darksouls on April 26, 2015, 05:09:27 AM i ended up just getting some aluminum flat stock and thin rubber. $4 bucks. saved quite a bit of weight just not using the specific hardware and brackets that came with the exhaust. I'd post pics but for some reason i dont know how on here.
Title: Re: mivv high mount install Post by: Howie on April 26, 2015, 05:52:28 AM Here ya go:
http://www.ducatimonsterforum.org/index.php?topic=109.0 (http://www.ducatimonsterforum.org/index.php?topic=109.0) Title: Re: mivv high mount install Post by: Slide Panda on May 01, 2015, 09:09:03 AM Please post.
I was pondering their High GP cans, but have aftermarket rear sets with only rider accomodations |