|
Title: Moonster 620 PC III install Post by: POCO LOCO on October 20, 2015, 01:38:53 PM Would by chance a PCIII installed on top of the battery (as per PC instructions) give any clearance issues when gas tank is lowered ?
Title: Re: Moonster 620 PC III install Post by: stopintime on October 20, 2015, 01:44:35 PM I have a PCIII on my battery - S2R800 - velcro to keep it from sliding around and secured by the rubber strap.
Can't imagine there being less space on a 620 Title: Re: Moonster 620 PC III install Post by: ducpainter on October 20, 2015, 01:46:22 PM Both plastic tanks?
steel? Title: Re: Moonster 620 PC III install Post by: POCO LOCO on October 20, 2015, 01:49:01 PM A 2006 Monster 620 has a plastic tank.
Title: Re: Moonster 620 PC III install Post by: ducpainter on October 20, 2015, 01:53:46 PM A 2006 Monster 620 has a plastic tank. I realize that.The earlier bikes had steel, and you didn't say what year until now. Isn't the pump flange directly above the battery? Title: Re: Moonster 620 PC III install Post by: Dirty Duc on October 20, 2015, 02:05:23 PM No, the flange is directly behind the battery.
Title: Re: Moonster 620 PC III install Post by: ducpainter on October 20, 2015, 02:17:17 PM No, the flange is directly behind the battery. Then the PCIII should fit.Title: Re: Moonster 620 PC III install Post by: NAKID on October 20, 2015, 03:35:20 PM Then the PCIII should fit. There may be a clearance issue with the under tank padding. On my S2R1000, I had to remove that to have enough room for the PCIII on top of the battery. Title: Re: Moonster 620 PC III install Post by: stopintime on October 20, 2015, 03:49:54 PM There may be a clearance issue with the under tank padding. On my S2R1000, I had to remove that to have enough room for the PCIII on top of the battery. Mine is gone too [thumbsup] Maybe not an issue on the 620, but if it is, remove it or cut an opening where the PCIII is. Title: Re: Moonster 620 PC III install Post by: He Man on October 20, 2015, 05:01:48 PM PCIII did not fit in my S2R1000 in that location. I placed it in front of the batter behind the airbox (which now has PODS). I dont run a PCIII anymore.
Title: Re: Moonster 620 PC III install Post by: POCO LOCO on October 21, 2015, 04:01:22 PM Removed the padding from under the tank which is held in place by velcro, and now the PC has enough room.
Title: Re: Moonster 620 PC III install Post by: NAKID on October 21, 2015, 04:06:22 PM Removed the padding from under the tank which is held in place by velcro, and now the PC has enough room. [thumbsup] [Dolph] Title: Re: Moonster 620 PC III install Post by: Slide Panda on November 12, 2015, 06:10:06 AM Had a PCIII installed on my '06 620 per the instructions. Everything was fine
|