I just bought an 01 m600. It has led signals already installed. The left side works great but the right side pulses the headlight and nothing happens to the signals. Anyone seen this issue before? If not does anyone have the wiring diagram for my bike?
Tia
Steve
The owner's manual is available here http://www.ducati.com/services/maintenance/index.do (http://www.ducati.com/services/maintenance/index.do) and the wiring diagram is in the back. From your symptoms I would start with the switch then move down to the harness from the switch that runs along the head tube.
Thanks Howie. My next day off is Sunday. Hopefully I can find the issue then.
I did order a new flasher from super bright LEDs and installed it tonight just to check. Now when I try either side turn signal both sides flash.
Resistors (?)
Cannot see any resistors
You need either resistors in series http://www.monsterparts.com/pc/EE033H/Elec-Signals/EE033H.html (http://www.monsterparts.com/pc/EE033H/Elec-Signals/EE033H.html) is an example from our sponsor Monsterparts with a directional on both sides or a compatible electronic flasher http://www.delcity.net/store/LED-Flasher-Relay/p_748191 (http://www.delcity.net/store/LED-Flasher-Relay/p_748191) might work. Flashers are a crapshoot, resistors work. This assumes all else is good.