I have almost finished coring/shortening my exhaust canisters. My plan was to powder coat the aluminum bodies. The oval body has a flat to give clearance for cornering. To disassemble the silencer I had to cut that 1/2 moon section out, I Tig welded a section back in. To prep for welding the coating was removed. Will the coating accept powder coat or must it be removed.
I removed all of the baffle and chambers. Shortened the canister to 10". Used a 1.5" perforated H-D baffle tube wrapped with hi temp fiberglass. I replaced everything and it sounds good.
Now its just a matter of making them look good..
Any ideas.
Thanks, Sterling
Ceramic coating.
http://www.headercoatings.com/pages/Motor_Sports (http://www.headercoatings.com/pages/Motor_Sports)