Does anyone have an install sheet or possibly a link to an installation instruction write up for this? This is the kit that has the full-size tachometer with the aluminum face that houses the idiot lights. I have it listed on the receipt as part number F77050 by fast by ferracci. I believe it is a kit made by roadracing but am not entirely sure.
I guess my question is, can I simply plug this gauge cluster kit into the existing M900 wiring harness or do I need to re-pin the connector/reuse the wiring harness from the bike that the gauge cluster was previously mounted in?
Both bikes are 1996 M900's
(http://uploads.tapatalk-cdn.com/20160617/8143c058a2577156f5018f9ac71ab920.jpg)
Would you show the back of the gauges and wiring connectors?
After some further research, it seems that this is the road racing kit, with a Ducati performance tachometer and not a Ducati performance kit.
It has the same connections as the stock cluster. Metal twist lock in hoe bottom center and a speedo cable connection. I can get a photo and post it up.
Sent from my iPad using Tapatalk
Likely plug n play except for the extra loom part of the tacho kit. Probably runs some wires to the ignitors.
It is plug and play.
IIRC, you have to transfer the idiot bulbs.
And the tach is connected to one of the ignition modules.