|
Title: 2016 M 1200 R Charcoal/Evap Canister Post by: Capt baz on July 30, 2016, 04:23:17 AM Anyone remove this without throwing a CEL? Just had the 600 mi service done & ask my Ducati technician to remove it & he said removing it completely would give a CEL because of the breather valve, and even if he kept just the breather valve there, capped, it might still throw a CEL. On a side note, I spoke with Dave @ Redline Performance Motorsports on the reflash for the 1200R & he said he is working on it now, & later this year will have something for it. I told this to my technician ( who sends a lot of stuff there ) & he said the relash may allow the ability to remove the canister & not have a CEL come on. Any info on this would be great.
Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: 696DCRider on July 30, 2016, 11:45:20 AM If you have the full termis which does not have a flapper valve I wonder if this is an issue. I was considering removing mine soon.
Sent from my iPhone using Tapatalk Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: Capt baz on July 30, 2016, 03:35:57 PM The 1200 R comes with the 58mm exhaust pipes already there. All you can do is buy the slip ons, which I did. The exhaust valve is there though. Not sure if that would have any thing to do with the charcoal/evap canister.
Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: 696DCRider on July 30, 2016, 05:12:48 PM The 1200 R comes with the 58mm exhaust pipes already there. All you can do is buy the slip ons, which I did. The exhaust valve is there though. Not sure if that would have any thing to do with the charcoal/evap canister. Oops. I didn't notice you said R. I have an S.Sent from my iPhone using Tapatalk Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: TitanMonsterS4R on July 31, 2016, 12:19:10 AM Oops. I didn't notice you said R. I have an S. Sent from my iPhone using Tapatalk What happened to your other Monster Sasan? Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: 696DCRider on July 31, 2016, 02:58:04 AM What happened to your other Monster Sasan? Hey Wunmi. I still have it for now but I will probably get rid of it since I don't have enough room for two bikes. Sent from my iPhone using Tapatalk Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: oldndumb on July 31, 2016, 08:40:59 AM I removed the canister from my R and left the valve in place and plugged off, but still connected electrically and it did not trigger a light.
Since the exhaust flapper wandered into the conversation, I will share that disconnecting the plug will trigger a light on the R. I removed mine completely, actuator and butterfly, and plugged the flapper shaft holes in the pipe. I used a ServoEliminator from HealTech to take care of the light. Note: I am specifically talking about an R. In spite of what some would prefer to believe, there is a difference. [roll] Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: Howie on July 31, 2016, 10:10:05 AM Thread jack:
What is MSRP on a 1200 R. Not what you paid, which is non of my business. Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: kopfjäger on July 31, 2016, 10:23:22 AM Thread jack: What is MSRP on a 1200 R. Not what you paid, which is non of my business. List is $18.8ish. Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: DarkMonster620 on July 31, 2016, 10:52:36 AM Thread jack: down here goes for about $23K for the S modelWhat is MSRP on a 1200 R. Not what you paid, which is non of my business. Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: Howie on July 31, 2016, 10:55:16 AM Thanks!
Title: Re: 2016 M 1200 R Charcoal/Evap Canister Post by: oldndumb on July 31, 2016, 01:49:09 PM Thread jack: What is MSRP on a 1200 R. Not what you paid, which is non of my business. U.S. list price is $18, 695 for the red; there is an additional charge for black. One can expect incentives to be offered as the model year ends. |