|
Title: Q about replacement voltage regulator Post by: Ddan on July 19, 2008, 05:50:39 AM Does anyone know how I would install the R/R from a '98 996 into a '92 SS?
This is the SS with stock hook-up: (http://farm4.static.flickr.com/3079/2681679051_86cfa3a418.jpg) The regulator is on the right of the pic. According to the wiring diagram, the 2 solid reds go to the battery +, white w/ red trace goes to the charge indicator, small red w/black trace goes to the fuse block This is the 996 hook-up: (http://farm4.static.flickr.com/3078/2681678991_157dfe1c79.jpg) Title: Re: Q about replacement voltage regulator Post by: clubhousemotorsports on July 19, 2008, 05:42:23 PM Yellow to yellow
red to red (top wire in your photo) green to ground the rubber plug on the wiring harness should get sealed/capped off. you will no longer have a battery light. this rectifier does not use a sensor line for the regulator either. better get it going trackday is on its way [moto] Title: Re: Q about replacement voltage regulator Post by: Ddan on July 19, 2008, 07:04:54 PM Cool, thanks. [thumbsup] I'm almost ready, timing is retarded as far as it will go, exhaust is ready for packing; once that's done I'll synch and adjust the carbs and it should be set.
|