Hello new Ducati family,
I am the new owner of a 2012 M1100 Evo. I am trying my best to track down a Spark High Mount Carbon Fiber exhaust and it is NOT a easy find. I thought it would be simple and easy to just grab the one from MotoWheels but they told me today they are not doing any special orders.
Can anyone help me find it. Hopefully for a price similar to the one from MotoWheels??
(http://i.imgur.com/4I67BWr.jpg)
Try our sponsors Motowheels and Monsterparts. Check the sponsor column to the lower left. [thumbsup]
Quote from: koko64 on November 16, 2016, 06:13:21 PM
Try our sponsors Motowheels and Monsterparts. Check the sponsor column to the lower left. [thumbsup]
Yea Motowheels is a no go. And Monsterparts as well. Thanks for the quick response. Will take a look at the sponsors column.
DesmoWorld carry a huge selection of Spark and usually order what they don't have in stock.
In Germany, but speaks English. They deduct VAT, but shipping might bring the price back up....
These are the US distributers:
BROCK'S PERFORMANCE
4064 EAST PATTERSON ROAD 45430 DAYTON, OHIO - USA -
Phone: TEL 011-937-912-0054
Fax: FAX 011-937-912-0062
E-mail: Sales@BrocksPerformance.com
Web-site: http://brocksperformance.com
MOTOWHEELS
11306 Sunco drive. Unit 1 Rancho Cordova, CA 95742
Phone: 9163692509
Fax: 9163692509
E-mail: customerservice@motowheels.com
Web-site: www.motowheels.com
Brock's web address comes up server not found. If you are determined to get that exhaust you may need to look outside the US. I see stopintime just gave you one.
Brock's comes up, but I didn't see Ducati exhaust
http://www.brocksperformance.com/
Thanks a ton everyone. I found it on http://www.euronetbike.net for $50 more so I ordered it. Now let's see if they actually have it.
I saw it on desmoworld (I think) but it was much more expensive.
Thanks for all the quick help.
Sent from my SM-G925T using Tapatalk
I wouldn't expect them to have it in stock, but hopefully able to order...
Which model did you order? Homologated/race only? New plate holder?
I went non homology homologated as I don't need the baffles here in my state. And I have the evotech tidy tail and am already planning to install integrated taillight so I should be fine.
Sent from my SM-G925T using Tapatalk
It seems like the DesmoWorld tail tidy has the plate further back than the Evotech, but you'll know for sure later.
Keep us updated [thumbsup]
Well after a few hiccups in the plan due to the original shipper running into some mechanical issues... she is finally been picked up.
Took advantage of CYBER MONDAY to pick up some accessories. Excited to get the mods added.
1. Spark High Mount Underseat exhaust ($775) (Exhaust made it to the main destination from Spark. Now in route to me.)
2. Motodynamics Integrated taillight and fender eliminator (to move the key hole given the new exhaust blocks it. $117 shipped for both)
3. CRG Arrow Mirrors (already owned)
4. SpeedyMoto full slider kit (frame, rear, front axel - $219 shipped)
5. *** Woodcraft clipons with ducati monster plate *** interested in buying if I can find on sle tonight or under $200.
(http://i.imgur.com/zdgA4FV.jpg?1)
The 'adapter plate' clip ons? (IMO they look weird)
They have normal clip ons with risers. Or Rizoma bars if sweep and down angle is what you want.
Quote from: mister704 on November 29, 2016, 02:22:53 PM
Well after a few hiccups in the plan due to the original shipper running into some mechanical issues... she is finally been picked up.
(http://i.imgur.com/zdgA4FV.jpg?1)
I hope that ratchet didn't rub and scratch the exhaust!
Quote from: NAKID on November 29, 2016, 03:56:43 PM
I hope that ratchet didn't rub and scratch the exhaust!
I know I damn sure hope not. Even tho, I have the spark exhaust coming. I still rather not have anything scratched on a practically new bike. Bought it with just 765 miles on it.
Can't wait to see it. Pretty sure I am going to have a closed garage session where I install everything.
Arrrgggghhh
Well, everything came in. I went through all the headache of installing the new fender eliminator just to find out I can't use it because it is too wide and messes up the alignment necessary to mount the cans. So I will have to ship it back (hoping they accept it) and I had to order the actual one that goes with the exhaust.
(http://i.imgur.com/IbhLKfh.jpg)
(http://i.imgur.com/nPEac5S.jpg)
I have did a few things. So I received the "under body" instead of the "through body" frame sliders so it left the metal sticking out so I sprayed the metal with black hardening epoxy and they came out really great. You cannot even tell they were ever not coated. I also installed the rear and front axel sliders and we are all good. Still not fully sure how I feel about the look of that rear slider.
(http://i.imgur.com/g27DIg0.jpg)
(http://i.imgur.com/cH9tnX9.jpg)
Key take aways from the basics so far:
1. Ducati Mirrors are cross threaded. Learned the hard way by stripping the head of the left side before I realized I needed to unscrew it the other way.
2. Pretty sure they coming