Hi there, Bike runs fine but the CEL is on. Pulled the code( via my Rexxer tool) and am getting a P0463 code. Looked it up and it is showing as Fuel Level High. Pulled the tank and did some checks. I am getting just under 12 volts at the Thermistor and 12.5 at the fuel pump. I can't seem to find a spec for resistance or voltage for the thermistor. I unplugged it and cleared the code and it did not come back. Plugged it back in and still no code. Thought maybe it was a bad connection... Put it back together and put 1 gallon of fuel still no code. I thought "problem solved". Filled it up and bingo, CEL comes back and P0463 again... I am thining it is the thermistor but am not sure. Anyone else deal with a P0463?
Scott