Text only | Text with Images

Ducati Monster Forum

Moto Board => Tech => Topic started by: Norwayfreddy on June 17, 2017, 12:55:00 AM

Title: Oil sensor on an 2005 s2r800
Post by: Norwayfreddy on June 17, 2017, 12:55:00 AM
Hi

Im having problem with my oil sensor after plugging it out when i change timing belts. The display only shows ----

Do i need to restart something? Only bad connection? I change the exhaust and ecu at the same time, does that effect it?
Title: Re: Oil sensor on an 2005 s2r800
Post by: Speeddog on June 17, 2017, 08:44:18 AM
Most likely a bad connection.

The wire fitting has to slip on to the head of the sensor.
Title: Re: Oil sensor on an 2005 s2r800
Post by: stopintime on June 17, 2017, 08:51:43 AM
The oil pressure connector, by the belts, is connected to the ECU.

The ---- in the display is from, or in this case NOT from, a bad connection under the clutch cover/oil sight glass.

Heia Norge  [thumbsup]
Title: Re: Oil sensor on an 2005 s2r800
Post by: ducpainter on June 17, 2017, 11:37:38 AM
Jeg skjønte at du ville hilse på ham på norsk [thumbsup]
Title: Re: Oil sensor on an 2005 s2r800
Post by: Norwayfreddy on June 18, 2017, 11:43:03 AM
Fixed [thumbsup]  thanks


Only bad connection ;)
Title: Re: Oil sensor on an 2005 s2r800
Post by: DuciD03 on June 19, 2017, 09:00:11 PM
Quote from: ducpainter on June 17, 2017, 11:37:38 AM
Jeg skjønte at du ville hilse på ham på norsk [thumbsup]

???

:o

8)

[Dolph]
Text only | Text with Images