|
Title: Brembo 3-spoke wheels Post by: cencalal on December 28, 2017, 06:02:39 PM I just looked at the part numbers for front and rear Brembo wheels from the '01 M600 through the '07 M695 and found that they're not the same (numbers) with the only exception being that '05 620 and '07 695 rears have the same number. Then the '09 696 shows two sets of each front and rear - one Marchesini and the other Enkei. I can see from photos on Ebay that there are two different front profiles - the outer edge or lip is a different shape on the 695 than on the previous models, and doesn't match the shape of the 695 rear.
But aren't a lot (or all) of these 3-spoke wheels interchangeable? I was going to get a used front from a 600 or 620 to match the shape of my 695 rear as part of a strip and refinish project... Thanks Title: Re: Brembo 3-spoke wheels Post by: ducpainter on December 28, 2017, 06:17:47 PM 620 wheel will be fine.
Title: Re: Brembo 3-spoke wheels Post by: Speeddog on December 28, 2017, 06:39:28 PM Latest part number I have is 50120801AB for an '07 695 front.
Modestly trustworthy interchange shows also used on '03-'06 620, '07-'08 695, '03 800, '06-'07 ST3, '07 800SS AFAIK, all 3-spokers are functionally interchangeable amongst their native axle sizes. I'm pretty sure all the small axle stuff is slightly different rim position than the big axle. |