Just got a Toby damper and the instructions suck!
Model # 15.DU09.06
-- The bracket the goes around the vertical frame rail is 20mm in diameter and the rail is 25mm.
-- The one bolt that comes with the bracket is about 7-10mm to short to even reach the thread on the back side of the bracket
--There is also a spacer & O-ring that the instructions are very vague on where they go.
-- The instructions call for the bracket on the fork leg to be 33mm from the "inferior Te fork" whatever that is.
55mm up from the bottom triple clamp seems to be correct.
-- The pics showing location on the printed instructions and the pics on their website show totally different positoning.
Any help or pics, dimensions, etc... would be appreciated.
Sounds like the wrong installation kit. I would confirm the damper too, since the stroke need to be correct. Call the vendor. Don't forget to ask what a "inferior Te fork" is. We all probably would like to know.
It's the correct model #.
Guess i'll Email Toby and see what they say.
Interior fork?
Typo maybe?
Lower triple