Print Page - DS 1000 fuel line clamps

Title: DS 1000 fuel line clamps
Post by: PA DL on October 12, 2018, 06:47:52 AM

Does anybody have a good way to open the fuelline clamps on a 07 S2R1K?
They looks like onetime use only.

Title: Re: DS 1000 fuel line clamps
Post by: PA DL on October 12, 2018, 07:25:42 AM

(https://uploads.tapatalk-cdn.com/20181012/9410269e48983945ef21dafac651573f.jpg)

Title: Re: DS 1000 fuel line clamps
Post by: RB on October 12, 2018, 07:51:25 AM

Probably Knipex clamps, you need the Knipex pliers to remove and reinstall, or just destroy with a screw driver and regular pliers, then replace with a new hose clamp.

Title: Re: DS 1000 fuel line clamps
Post by: PA DL on October 12, 2018, 09:38:52 AM

I wanna run the feed an return line outside the aluminium beems and a short tube between the injectors. Any negative efects that I havent thought about if I do that?(https://uploads.tapatalk-cdn.com/20181012/026d2cc3ec78eb0f376c2368c87ec55c.jpg)

Title: Re: DS 1000 fuel line clamps
Post by: RB on October 12, 2018, 10:39:51 AM

Should be fine, as long as no kinks in the hose. Fuel injection just needs to build and sustain pressure, it doesn't care much about length or bends.

Title: Re: DS 1000 fuel line clamps
Post by: PA DL on October 14, 2018, 01:53:42 AM

Thanks RB

Title: Re: DS 1000 fuel line clamps
Post by: Speeddog on October 14, 2018, 09:13:16 AM

Don't let the line chafe on sharp edges.

Running pressure is 45psi, so leaks are serious.

Ducati Monster Forum

Moto Board => Tech => Topic started by: PA DL on October 12, 2018, 06:47:52 AM