|
Title: upper clamp pins - help with mount Post by: Pleh on June 28, 2024, 01:57:03 PM guys, can someone help me with this f*****g thing ... I got used upper triple clamp, but it is missing lower pins that hold air pressure sensor. I ordered the pins but the diameter is smaller then the hole ... I was able to find old and destroyed clamp and I saw that these pins are somehow widened ... does anyone know how to set put them in place?
https://imgur.com/a/zpCthSB Title: Re: upper clamp pins - help with mount Post by: stopintime on June 28, 2024, 02:08:33 PM You can put the sensor anywhere, by the use of zip ties.
Your picture service forces me to accept privacy violations OR spend forever to deny (still just) a small part of them. Will you consider using a service with "forum hot link"? Title: Re: upper clamp pins - help with mount Post by: Pleh on June 28, 2024, 02:14:12 PM You can put the sensor anywhere, by the use of zip ties. Your picture service forces me to accept privacy violations OR spend forever to deny (still just) a small part of them. Will you consider using a service with "forum hot link"? where do you usually upload photos? Title: Re: upper clamp pins - help with mount Post by: stopintime on June 28, 2024, 02:28:05 PM I use Postimage.org
https://postimg.cc/files I choose album, picture, share button and Hotlink for forums (Remember to make albums from the start) (https://i.postimg.cc/ZnNZ0MyM/Ride.jpg) (https://postimages.org/) Title: Re: upper clamp pins - help with mount Post by: Pleh on June 29, 2024, 12:52:22 AM (https://i.postimg.cc/hf7HnppH/viber-image-2024-06-28-23-52-16-576.jpg) (https://postimg.cc/hf7HnppH)
(https://i.postimg.cc/rdqbScMk/viber-image-2024-06-28-23-52-25-502.jpg) (https://postimg.cc/rdqbScMk) (https://i.postimg.cc/68JFpnPT/viber-image-2024-06-28-23-52-25-787.jpg) (https://postimg.cc/68JFpnPT) (https://i.postimg.cc/Mn7NMXk5/viber-image-2024-06-28-23-52-25-991.jpg) (https://postimg.cc/Mn7NMXk5) Title: Re: upper clamp pins - help with mount Post by: stopintime on June 29, 2024, 01:37:07 AM Ok - they are the locating pins (dowels?) for the U-bracket. Sensor is not related. If you have the correct size, it's about forceful twist, turn, push and pull.
Title: Re: upper clamp pins - help with mount Post by: Pleh on June 29, 2024, 10:42:51 AM I ordered two of them from official Ducati shop, with VIN number, and the diameter is smaller then the hole ... they seem like rolled piece of metal, so I am thinking there is a way to put them inside the hole and then spread them somehow
I mentioned the sensor pecause U backet is the one that it mounts on. Title: Re: upper clamp pins - help with mount Post by: stopintime on June 29, 2024, 11:55:05 AM , so your second hand upper triple has a different diameter hole? I'd think there are correct diameter pins to be bought - dosn't have to be Ducati.
If you end up drilling/widening the hole.... make sure you stop half way since the rubber vibration damper is screwed down into the upper half. Title: Re: upper clamp pins - help with mount Post by: ducpainter on June 29, 2024, 12:12:13 PM Those are standard coiled spring pins. Measure the hole in mm and head to the hardware store.
If you can't find the coiled variety a regular roll/spring pin will work. Title: Re: upper clamp pins - help with mount Post by: Pleh on June 29, 2024, 12:18:37 PM Thank you all for help, tomorrow I will try to fix that.
|