|
Title: CNC Machining Post by: Some Dude on May 22, 2010, 12:38:46 PM Hi I recently purchased a Haas cnc mill for my garage. I have access to a lathe as well. If you have an idea or want some kind of custom part send me a PM and I will see what I can do. I will be posting up pics of some parts I have already built pretty soon. I have 15 years machining experience so this is not something I am just trying to figure out or play around with.
Thanks For looking (http://i131.photobucket.com/albums/p295/jproct/IMG_4948.jpg) (http://i131.photobucket.com/albums/p295/jproct/IMG_4947.jpg) Title: Re: CNC Machining Post by: He Man on May 22, 2010, 04:01:23 PM It maybe nice to may post a per/hr example with examples of how long something took. God knows the last thing you need is a inbox exploding full of PMs. ;D
Title: Re: CNC Machining Post by: Some Dude on May 25, 2010, 03:34:10 PM It maybe nice to may post a per/hr example with examples of how long something took. God knows the last thing you need is a inbox exploding full of PMs. ;D Good Point. Here is a set of Parts to do a GSXR Fork Swap. Took me about 4 to 5 hours charged $150 (http://i131.photobucket.com/albums/p295/jproct/IMG_4949.jpg) (http://i131.photobucket.com/albums/p295/jproct/IMG_4950.jpg) Title: Re: CNC Machining Post by: DarkStaR on July 20, 2010, 05:09:03 PM Master cylinder spacers please!
(http://corsair-industries.com/images/Ducati%20Clip-On%20Spacer/Ducati%20Clip-on%20%20Spacer.jpg) Title: Re: CNC Machining Post by: desmoworks on July 20, 2010, 07:40:54 PM I'm getting ready to start a new project bike and need some parts machined. Where are you located?
Title: Re: CNC Machining Post by: Some Dude on July 21, 2010, 02:17:28 PM I'm getting ready to start a new project bike and need some parts machined. Where are you located? I am located in utah. What kind of project are you starting? Title: Re: CNC Machining Post by: Some Dude on July 21, 2010, 02:20:09 PM Master cylinder spacers please! (http://corsair-industries.com/images/Ducati%20Clip-On%20Spacer/Ducati%20Clip-on%20%20Spacer.jpg) I could build some of those would there be much interest form other people? The more I can build the lower the price will be. Title: Re: CNC Machining Post by: desmoworks on July 21, 2010, 02:21:56 PM I am located in utah. What kind of project are you starting? Doing a custom Moto Guzzi V7. Was hoping you were around LA. I need triples with bar riser, foot pegs and a couple of other brackets to be machined. Title: Re: CNC Machining Post by: Some Dude on July 21, 2010, 02:35:10 PM Doing a custom Moto Guzzi V7. Was hoping you were around LA. I need triples with bar riser, foot pegs and a couple of other brackets to be machined. Sounds like a fun project. If you can draw what you need I should still be able to build it. Let me know if you need anything & good luck. Title: Re: CNC Machining Post by: The Bearded Duc on July 27, 2010, 10:51:14 PM Some Dude: Are you able to machine a top triple for older monsters('01 M750)? I'm looking for forks so I'm not sure if I'm gonna end up doing a 50mm bore or a 53mm bore for the forks but I figured I'd ask first.
Title: Re: CNC Machining Post by: Some Dude on July 28, 2010, 03:10:01 AM How about some heelguards for the stock setups. Mine look terrible & don't keep my right heel off the pipes. Almost all other makes have some badass looking guards. It's possible. which model bike do you have? Can you give me an example of what your thinking? Title: Re: CNC Machining Post by: Some Dude on July 28, 2010, 03:11:08 AM Some Dude: Are you able to machine a top triple for older monsters('01 M750)? I'm looking for forks so I'm not sure if I'm gonna end up doing a 50mm bore or a 53mm bore for the forks but I figured I'd ask first. I can do it. Title: Re: CNC Machining Post by: The Bearded Duc on July 28, 2010, 08:02:16 AM I can do it. About how much would that run me? Would there be a difference in price for the different bore? Title: Re: CNC Machining Post by: El Matador on July 28, 2010, 08:58:03 AM If I send you a CAD drawing would you be able to make it happen? I've got some rearsets I've designed that I would like to have machined.
Title: Re: CNC Machining Post by: suzyj on August 01, 2010, 01:19:34 PM I could build some of those would there be much interest form other people? The more I can build the lower the price will be. Yes please! Title: Re: CNC Machining Post by: Some Dude on August 01, 2010, 06:18:58 PM If I send you a CAD drawing would you be able to make it happen? I've got some rearsets I've designed that I would like to have machined. Sorry, Haven't beenhere in a while I would love to look at them, if you would like to send me some drawings, I can tell you if I can do it or not. Please send them to vector.rd@gmail .com Look forward to hearing from you. Title: Re: CNC Machining Post by: Some Dude on August 01, 2010, 06:19:53 PM Yes please! I have a few things I need to wrap up first but they are on my list. Btw are you making any progress on the regulator/rectifier thing? Title: Re: CNC Machining Post by: soydano on April 10, 2011, 05:13:55 AM Good Point. Here is a set of Parts to do a GSXR Fork Swap. Took me about 4 to 5 hours charged $150 (http://i131.photobucket.com/albums/p295/jproct/IMG_4949.jpg) (http://i131.photobucket.com/albums/p295/jproct/IMG_4950.jpg) i need this kit . can you do it for me ?. Also i want caliper (5mm) spacers too. can you ship to Turkey for me? please send p.m for cost. Title: Re: CNC Machining Post by: soydano on April 10, 2011, 05:16:44 AM Good Point. Here is a set of Parts to do a GSXR Fork Swap. Took me about 4 to 5 hours charged $150 (http://i131.photobucket.com/albums/p295/jproct/IMG_4949.jpg) (http://i131.photobucket.com/albums/p295/jproct/IMG_4950.jpg) and i think may need some 2 X 1mm aliminum sheet for lower triple because i bought 2007-2008 forks. am I right? Title: Re: CNC Machining Post by: Steve.In.Atlanta on September 20, 2011, 08:41:56 AM Could you do rear brake lever and shifter for a 2001 M900S? They would be going on the stock rear set.
|