|
Title: PC III for an 07 S4RS Post by: A John In NJ on October 10, 2018, 07:17:51 AM Good day folks!
I've gone through the internet looking for an answer to my question. Is there a list or a sticky that states which Power Commander III models match the connecting wires to my 07 S4RS. I've seen that riders/tuners have used other year Monster PCIIIs to dyno tune their bikes. Any help would be greatly appreciated! -John Title: Re: PC III for an 07 S4RS Post by: Heath on October 16, 2018, 07:39:22 PM This may not be the answer you want to hear. With all the advancements in ECU mapping I would rather go with a custom remapped ECU for a PCIII. Less wiring on the bike, less to go wrong. Much better than a piggy back system.
Title: Re: PC III for an 07 S4RS Post by: Howie on October 16, 2018, 09:03:00 PM This may not be the answer you want to hear. With all the advancements in ECU mapping I would rather go with a customer remapped ECU for a PCIII. Less wiring on the bike, less to go wrong. Much better than a piggy back system. [thumbsup] Title: PC III for an 07 S4RS Post by: GK on October 19, 2018, 11:00:30 AM I have a PCIII and agree with the wiring comments. I am however very happy with the tuning results.
If the cost was the same, I certainly see why you’d go the ECU route. Title: Re: PC III for an 07 S4RS Post by: koko64 on October 19, 2018, 07:51:14 PM Any luck? I note that some PC units are discontinued.
Title: Re: PC III for an 07 S4RS Post by: Saltash on December 27, 2018, 03:33:45 AM Power Commander III USB No. 733-411 for Ducati Monster S4R 2007-2008 - discontinued.
Microtec m197 bit expensive. Found Rexxer dealer than can flash ECU, and then do a dyno tune. Most places just offer canned tunes based on components fitted. If u r happy with that, no worries. I've just always had dyno tuning with my cars/bikes.. Title: Re: PC III for an 07 S4RS Post by: koko64 on December 27, 2018, 03:58:42 AM A canned map is a baseline IMO so I agree that a good dynotune finishes the job properly. Pity you can get a PC for it. Who is able to re flash and dyno tune to the ECU in your area?
Title: Re: PC III for an 07 S4RS Post by: Saltash on December 27, 2018, 05:33:11 AM Firstly, I'm in Australia.
The guy who has the Rexer rights for Australia, Gary Naysmith has a business : Torque Power Motorcycles, and he says: "Dyno tuning no problem, depending on how long is needed to do a custom map $AU 600-$800" I just have to wait till my Arrow race pipes are cut and integrated with an SC Project OVAL R60 / CARBON FIBER / D07-07C - then book in. Xmas New Year means waiting till 6th Jan to book for exhaust work. Title: Re: PC III for an 07 S4RS Post by: koko64 on December 27, 2018, 08:45:00 AM I'm in Melbourne. Brad Black (bikeboy) does re flashes down here. So this bloke can write a custom Rexxer map via dyno tuning? Awesome.
Title: Re: PC III for an 07 S4RS Post by: Saltash on October 12, 2019, 03:10:20 AM He didn't deliver. Tried to sell me a canned tune when I was ready for dyno. After a few false leads found Fred at Procycle Dyno (Brisbane) who did a great job.
|