|
Title: only hi beam on new headlight setup Post by: whitechocolate781 on July 25, 2021, 10:24:12 AM Hello,
So, I bought an integrated headlight kit for my 00' 750, projection hi and low beam, LED signals, pretty tight.. hooked it up, however no connection for the PAS light, its just a simple hi beam and lo beam. so i wired it as such and taped off the unusable bits and only used the white wire and yellow/black wire. I have no low beam function, only hi beam even after playing around with the config. "also the rear tail light is LED with integrated signals which work fine-ish", I was replacing the switch anyway and thought it might fix the issue, i have a aftermarket setup, no instruction of course, after trying different wires, still same result, only hi beam, so weird. below is the factory headlight plug, white, yellow/bk and black were used. of the connections from the aftermarket, the white/blue/yellow relate to the headlight setup, ive tried several variations. im at a loss, no low beam, only the high beam config shows. some Duc's have a headlight relay switch, but this is a 2000 monster 750. I dont see any, only a flasher switch and ignition relay. Title: Re: only hi beam on new headlight setup Post by: stopintime on July 25, 2021, 11:09:32 AM Why only white and yellow/black? Need three....
Title: Re: only hi beam on new headlight setup Post by: whitechocolate781 on July 25, 2021, 11:13:17 AM well, and this is why im looking for input, there was a solid yellow attached the PAS, should I just tie that one to the yellow/blk?
Title: Re: only hi beam on new headlight setup Post by: Howie on July 25, 2021, 01:19:52 PM Correct, no relay. Yellow with black stripe is hi, white is lo, black is ground and solid yellow is for the small bulb in your OEM headlight. Since your LED headlight is aftermarket I can't go further. Maybe if you tell us brand and model. Emphasis on maybe. Title: Re: only hi beam on new headlight setup Post by: whitechocolate781 on July 25, 2021, 01:32:27 PM https://www.amazon.com/SKTYANTS-Headlights-Housing-Motorcycle-Davidsion/dp/B078MVXJBL/ref=sr_1_36?dchild=1&keywords=ducati+monster+7%22+round+headlights&qid=1627248687&sr=8-36
Title: Re: only hi beam on new headlight setup Post by: whitechocolate781 on July 25, 2021, 07:02:48 PM so weird, on the factory harness, where the switch plugs in, the wires are reversed. and yellow is looped over ..wish this forum enabled image posting instead of links.
Title: Re: only hi beam on new headlight setup Post by: ducpainter on July 26, 2021, 02:18:15 AM so weird, on the factory harness, where the switch plugs in, the wires are reversed. and yellow is looped over ..wish this forum enabled image posting instead of links. It's a free forum. Photo hosting isn't free.Title: Re: only hi beam on new headlight setup Post by: Heath on July 28, 2021, 04:47:36 PM Is this what your wiring is like? Looks like you could hook the parking light to the brown wire to get a day time running light. I would mess around to make sure you don't have anything reversed.
(https://m.media-amazon.com/images/I/61Dzjyb3dOL._AC_SL1100_.jpg) |