how do you install ignitech sparker

[grinningevildeath]

how do you install ignitech sparker on a 2000 m750? i cannot figuire out which cables go to which coil. any help would be greatly appreciated.
thanks

[greenmonster]

On mine, the pickup cables had black or white protection (the 2wire pair from alt cover).
So white to white & black to black and connect the 3wire coil cable
from the old ign module the same:
The module w white wired pu gets the white 3wire connection from Ignitech.

[grinningevildeath]

on mine, the cable colors are throttle side are black/grey/red the other side is black/browngreen/red. ignitech cables are white connector one white wire, black one has red/orange/blue?

[greenmonster]

Forget the Ignitech wiring colours,
just read & follow my directions regarding the plastic connectors,
just follow black & white.

The 2 pairs of wires from Left side of engine, what colour is the shield/wrapping of them?
A pic would be helpful.

[grinningevildeath]

ok images included

[greenmonster]

If the first pic duo, 1 x 2 wires fr pu + 1 x 3 wires to coil, were on the same org ign module
and it`s the same in pic 2, they were on same module, you`ve got it right.

The black or white pu protection I mentioned you see in pic, black around the pu wires.

[grinningevildeath]

cool, thanks for all your help

[greenmonster]

No problemo,
all is working good now?

[grinningevildeath]

started the sucker up and...... nothing but back firing. will not run grrrr. i took the unit out plugged it up to pc and the software gives me not connected to pc? so i cannot chech if its setup correctly damn, bike.

[turbodude]

Was the key on when you plugged in?  The unit needs to be powered up to communicate.