Electrical blowout

[Bellagio]

So I was rewiring the rear end of my bike with 16GA.  Got all the rear integrated LED wires ran and taped (except for two lines I left for the license plate LED light wires).  I plugged it in and turned on the bike.  In my infinite wisdom I left two wires stripped and they touched my pipes.  Pretty sure I shorted everything out.  Now when I turn the key I can hear the injectors whir, but the dash is blank, I can't start it and I don't think any other electrical is working.  Not sure what fuse might have blown or if everything is fried.  I don't know where the fuse box is located (so pissed at myself when it happened I just walked out of the garage)or if this is going to be something much worse.  Someone help!

[Slide Panda]

Either under the seat, or under the gas tank, depending on what era bike you have.

[Bellagio]

It's on a 2002 620ie.  Guessing it's under the tank because there's nothing under the seat (took apart the rear and I don't think she'd run with out it).

[GAAN]

620 is under the tank, throttle side, next to the ECU

[GAAN]