695 Timing Belts

[Paegelow]

Anyone know where to get belts for a 695?  Are they the same as any other models?

[ducpainter]

Don't know for sure if they're the same as others, but it doesn't appear they're available anywhere but the dealer.

[Paegelow]

That's about what I've found so far.  CA Cycleworks has these, but I'm not sure if any of them apply.  I sent them an email.
http://www.ca-cycleworks.com/exactfit/

Know of any dealers that you can order online from?  My local dealer closed last fall so I have nowhere to go around here!

[ducpainter]

That's about what I've found so far.  CA Cycleworks has these, but I'm not sure if any of them apply.  I sent them an email.
http://www.ca-cycleworks.com/exactfit/

Know of any dealers that you can order online from?  My local dealer closed last fall so I have nowhere to go around here!

I didn't see where Chris has them yet.

I'd suggest either of our dealer sponsors...

Commonwealth or Ducati Seattle.

I don't think you could go wrong with either of them.

[Paegelow]

I was just looking at the part numbers for timing belts in the parts catalogs on the Ducati website.  The 695 and S2R800 belts are the same part numbers, but I couldn't find any other models that share the same number.

Then again, I looked up the models listed for the four different belts Chris is selling, and not all of them had the same Ducati P/N, even though the same belt from Chris applies.  So maybe there is another model that shares the same belt with the 695 and 800.

I haven't heard back from CA Cycleworks yet, so I'll see what they say.  I'll also check out those dealers, thanks!

[Paegelow]

Here are a bunch of timing belts!
http://www.mcmaster.com/#drive-belts/=69uy9l

I wonder if any of these would actually fit!

[Paegelow]

UPDATE!!!  I just heard back from CA Cycleworks.  They are indeed making belts for the 695's and 800's, they're just not ready yet.  They said they will hopefully be ready in April, and they'll let me know when they're available.  Problem solved!!!

[Speeddog]

AFAIK, all '01 and later 2-valve 600 through 800, (except 696) use the same belt , 73710051A.

Oh, there's a small chance that one of those belts from McMaster-Carr might fit, but I don't think it'd be a good idea.

[CannedIce]

UPDATE!!!  I just heard back from CA Cycleworks.  They are indeed making belts for the 695's and 800's, they're just not ready yet.  They said they will hopefully be ready in April, and they'll let me know when they're available.  Problem solved!!!

New ETA is end of May. I just wanted to put it out there in case you all need them sooner. A holiday slowed production unfortunately. Sorry about this!!