Main Menu

What are the caliper/master bleeder thread sizes/pitches?

Started by DucHead, August 02, 2010, 11:11:46 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

DucHead

August 02, 2010, 11:11:46 AM
After fitting Speed Bleeders on my Bandit, I want to put them on my Monster as well.

I'd like to avoid removing the OEM bleeders to measure thread pitches and sizes, so can anyone tell me those values for the OEM Brembo masters and calipers on my '05 S4R?

Thanks,
  Dave
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

ducpainter

#1
August 02, 2010, 12:51:59 PM
10X1.0
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


Duck-Stew

#2
August 02, 2010, 07:09:04 PM
Quote from: ducpainter on August 02, 2010, 12:51:59 PM
10X1.0

Not that one should doubt the 'painter, but I can confirm.  M10x1.0
Bike-less Portuguese immigrant enjoying life.

Speeddog

#3
August 02, 2010, 07:19:17 PM
Just to clarify, the OEM brake fitment for an '05 S4R is widely known as goldlines.

I suspect early calipers and masters may be different on the bleeds.
But I've not checked, as I've never had reason to pull one out.  :-\

As far as the banjo fittings, everything's been 10x1 for what I've had my hands on.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

DucHead

#4
August 03, 2010, 12:41:41 PM
And the winner is....Speeddog!!   ;D

Normally, I wouldn't doubt anyone who posted here either, but I had about 1 mm of thread to bias me.   ;D

So, I pulled one and it's M8 x 1.25.   [moto]
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

Speeddog

#5
August 03, 2010, 12:57:47 PM
Which bleeder was it that was 8x1.25?
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

DarkStaR

#6
August 03, 2010, 01:23:06 PM Last Edit: August 03, 2010, 01:25:26 PM by DarkStaR
Bleeder should be SMALLER than a 10!?!?!  Banjo, sure. Bleeder...?

I would have guessed smaller than 8, but i guess i would have been wrong.

DucHead

#7
August 03, 2010, 02:57:28 PM
Quote from: Speeddog on August 03, 2010, 12:57:47 PM
Which bleeder was it that was 8x1.25?

Front caliper...I wonder if the front brake master is the same?
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

Dannog

#8
August 04, 2010, 10:04:55 PM
I've been trying to work this out to replace them for brakes and clutch lines for my S4RS with (Radial Brembo monoblocs). This is where I'm at. Can anyone confirm or fill in the blanks ???

Front Brake Master Cylinder
Banjo M10 x 1.25
Bleeder ???

Front Brake Callipers
Banjo M10 x1.0 â€" with bleeder - same Ducati part number as for clutch slave cylinder
Bleeder M8 x 1.25 - same Ducati part number as for clutch slave cylinder

Rear Brake Master Cylinder
Banjo Bolt M ? x ?? - same Ducati part number as for clutch master cylinder

Rear Brake Calliper
Banjo Bolt M8 x 1.0 - same Ducati part number as for clutch master cylinder
Bleeder

Clutch Master Cylinder
Banjo Bolt M ? x ?? - same Ducati part number as for rear brake master cylinder & calliper

Clutch Slave
Banjo Bolt M10 x1.0 â€" with bleeder - same Ducati part number as for front brake calliper
Bleeder M8 x 1.25 - same Ducati part number as for front brake calliper

ducpainter

#9
August 08, 2010, 03:33:22 AM
 [bang]

Reading is fundamental

[bang]
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


DarkStaR

#10
August 08, 2010, 11:29:03 AM Last Edit: August 08, 2010, 11:31:46 AM by DarkStaR
I've mixed all (S2R1K & 749/999) of the front end masters and caliper banjos, and they were all the same thread wise.

DucHead

#11
September 02, 2010, 04:26:33 PM Last Edit: September 11, 2010, 07:32:42 AM by pompetta
I finally got around to replacing these and for posterity, I'm listing the bleeder thread sizes here for a desmoquattro S4R.

Front brake calipers = M8x1.25
Front brake master cylinder = M6x1
Clutch slave = M7x1
Rear brake caliper = M10x1

'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"
Print
Go Up Pages1
User actions