Replacing Fuel System

Started by Javamoose, September 04, 2010, 12:34:25 PM

Previous topic - Next topic

Javamoose

Since I am redoing the tank liner (kreme peeled) on my 2000 M750 - I've decided to replace the fuel pump, filter, lines as well.  It needs to be done, while I've got the tank off seems like the time to do it.

I'm replacing the stock pump with the Mikuni fuel pump from CA-Cycleworks.

For the fuel lines, found a few options but not sure which is best or what I should go with (also don't know sizes, really need to get a workshop manual).

Was looking at these:

http://www.bikebandit.com/motion-pro-clear-vinyl-fuel-line
http://www.bikebandit.com/motion-pro-braided-vinyl-fuel-line
http://www.bikebandit.com/motion-pro-tygon-fuel-line
http://www.bikebandit.com/parts-unlimited-blue-polyurethane-fuel-line

Any thoughts?  I know tygon is a good brand for lines, though the clear braided would be kinda neat.

For fuel filters, I want to go with a visible cleanable filter.  Was looking at these options:
http://www.bikebandit.com/biker-s-choice-clear-view-glass-fuel-filter
http://www.bikebandit.com/emgo-universal-fuel-filter
or
http://www.bikebandit.com/golan-peak-flow-fuel-filter  <-Not visible, but from what I can find looks to be a good filter.
http://www.bikebandit.com/visu-filter-large-capacity-90-degree-fuel-filter  <- Not cleanable, but cheap and the 90* might be easier to fit.

So, any thoughts or help would be greatly appreciated.  [thumbsup]
2000 M750

Javamoose

Hmm, no one has replaced fuel lines??   :P
2000 M750

Speeddog

All of those fuel lines seem to be sold in 25 ft. rolls.

The sintered brass filters don't usually flow well enough.

- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

Javamoose

Quote from: Speeddog on September 05, 2010, 11:48:57 AM
All of those fuel lines seem to be sold in 25 ft. rolls.

The sintered brass filters don't usually flow well enough.

Yeah, but they are pretty cheap for a 25ft roll...so no biggie. 

What about the screen filters like the Emgo Universal?  How much flow does a carb'ed monster need?
2000 M750

64duc

  Screen type filters don't filter small enough particles to suit me.  Why not find which of your local auto parts suppliers carries clear plastic paper media filters. They are really cheap and have a large capacity. Then you just replace it. If you ever even need to. Filtration is usually 10 to 25 microns.
94 M900, 64 Diana 250