1100 start issue (compression)

[Nxtr6]

Make sure run switch is on ( I never use mine, so it stays on)

Insert key and turn to run position.

Watch gauge let it cycle through to the ODO screen (tech stated you don't have to wait for complete cycle, I guess I am a little ocd about it...).

***Important note as per tech do not touch throttle during this procedure, (I am guessing that part of this Duc Don't Start Dance is the TPS being reset as well).

I digress so when you see the ODO screen;

Turn key to off position.

Do The Dance 2 more times then go through a regular start procedure and all should be good...

Remember to watchout for the down shift stalls while it is relearning...


Let me know if it works for you as well...


V/R,
Nick

[citizin]

Does the 3 key recycle apply to all Ducs?

I've had similar problems before (and currently experiencing a problem that this may help fix.)

And can an ECU reboot hurt anything?