Pics of newer fender on older forks?

[greenmonster]

I an looking for pics of -00 & newer front fenders on the old forks w 40mm c/c caliper bracket.
Pics showing brackets/fastening really appreciated!

I guess someone has done it or is it undoable?

[Drunken Monkey]

Older style has two bolts that are spaced relatively close together, and bolt directly to the fork bottom (but you knew that, since that's what you have  )

Newer style has a separate clamp that attaches to the fork and the bolts are relatively far apart and the top one's a bit lower, I think.

The good news: You should be able to make an adapter.

Pics to follow (this info is based off a pre '00 750 and an '01 900)

[Mad Mal]

I Have a 696/1100 front fender on my 07 S4R, straight swap, just the brake line clamp/holder thingo on the new fender you dont need

[greenmonster]

Pics appreciated, dm...

[junior varsity]

If you want to do a SBK fender, you can get an 888 style fender

[Drunken Monkey]

Sorry for the delay (camping this weekend)

I'll take a snapshot when I'm down in the garage tonight.

[greenmonster]

No worries, winter almost here (and the real bike season starts....)


Btw, did I send any Ignitech maps to you?

[Drunken Monkey]

I don't remember anything about any ignitech maps... Then again, I'm senile

Newer Style fender mount (with adapter to mount older style fender):


Older style fender mount:


No reason the same kind of adapter couldn't be used to mount a newer style fender to an older style fork.

Hell, a simple strip of aluminum with bolt holes in it at the old and 'new' locations would probably do the trick.

[ducpainter]

If you want to do a SBK fender, you can get an 888 style fender

An older SS fender works too with a couple of shims