Turn Signals

[jgrimm]

Hello fellow Ducati owners. I am new to this forum and new as a Ducati owner. I was wondering if any of you could help me with a small problem I am having with my turn signals. They just stopped working. I have a 2009 696 and have recently installed an LED taillight that integrates the turn signals. I made sure to test everything before I reassembled the rear-end and it was working fine. The next day after my forst ride the headlame and tail/brake lights work, but I have no turn signals. ALso, the fuses are all in tact. PLEASE HELP!

[errazor]

Does Your front turn signals work? If no, try to disconnect the rear light unit. If the front turnlights work without the rear unit connected I think something is wrong with your backlight unit.

[jgrimm]

The front ones do not work either. I'll try that tonight. I also was told that if one of the turn signal wires came loose, or was pinched that none of them would work. Have you heard this?

[errazor]

I have read about a lot about bad rear light units, thats why i bought mine from Bernard at vizi-tec,
a bit more expensive but alot better.
A loose connection will give you a fast flashing front signal. a pinched cable should only give you trouble on the side that the error exist.

[Howie]

Have you checked the fuse?

[jgrimm]

ALL IS WELL MY FRIENDS!!!! The wires were pinched--fixed the problem and works like a dream.