My new monster project - 2000 900 i.e.

[otter1]

Picked this bike up as a father and sons project.

Was sitting outside for several years so needs TLC. Lots of rusted bolts and chain.

Stock except  power commander, K&N airfilter, replacement handlebar (original replaced after a Left low side) and carbon fiber mufflers - I think they are Termis.

So far I have drained the oil and gas tank - there was some sediment/separation in both.

Hope I can get her back on the street without blowing out my wallet  

I want to post pics but dont know how..


Learned how to post it - I am a slow learner

[ducpainter]

http://www.ducatimonsterforum.org/index.php?topic=109.0

 

[ducatigirl100]

Looking forward to see this project 

[Nottsbiker]

I'll be watching this one closely as well because I'll be slowly rennovating / rebuilding my Airfix kit style 900 Carbed Monster 

[otter1]

Lets see if this works...

[ducpainter]

Lets see if this works...

If you use the link to your 'page' it won't show the pic...just that funny icon



use the link for each picture

[otter1]

Thnks ducpainter - 2 more pics?

[DesmoTull]

Looking forward to seeing what you do with it!

[2001cromo]

Thnks ducpainter - 2 more pics?

Looks like the URL itself was in the above twice...

[Speedbag]

I need to find me another Monster in about that same condition..... 

[otter1]

Thanks for help with the pics. I dont know why I cant get the link right 

Lots of work done on the back end so far. Cleaned wheel, lubed and adjusted with replaced chain, rear brake maint, etc.

Got LT Snyders maint book. Going to replace the plugs and belts then move on to the controls and front end maint.

Plan to bring it to Mellilimoto for valves and dyno/tune up.

[pitbull]

very nice.


If you end up needing any parts, shoot me a pm. I rebuilt a 2000 900ie a couple years back and also rebuilt my 2001 900ie. I have a number of odds and ends kicking around.

[otter1]

So far I have cleaned and fixed the back half. Will post a pic later this weekend. I finally figured out how to work the photobucket image upload - LOL. Now have posted a pic showing it on delivery in my first post.

Take apart, clean, find what is broken/needs replacement, order new/find used, patiently wait for it to be delivered (beer in one hand and cigar in other while imagining how it will look when done), part arrives - install, move on to next area. 

[ducrider45]

I built a custom 2000 900ie project a while back . Have fun; I did.  

[otter1]

Got a few new pics to show the before and after backend progress. The bike has a 41 tooth rear and 14 tooth front sprocket. It was a choice between too long or too short chain  length (I needed 1/2 link off). I may get the cush drive redone and put a 39 tooth back on and the chain will be just right 







Now on to the clutch and timing belts