starting issue on an m900 - 2002

Started by muskrat, October 14, 2012, 04:56:26 PM

Previous topic - Next topic

muskrat

Ok so the guy who bought my M900 has started having trouble with the bike yesterday. 
Here's what has happened:
the LED light above the rubber buttons on the dash starting flashing yellow (once then dark) which indicates no code stored according to what I've read.  I just had the ECU/Cluster re-flashed by SOS to put the immobilizer back on the bike as the purchaser requested.  I started the bike here twice and ran it for over 5 minutes after installing the cluster and ECU back on with both black keys.  I mentioned to use the red key and re-program the unit again which he did and still same problem.  It appears to click but not turn over.  The only thing I can think of is there is a problem with a stored or erased code.  Until yesterday this has NEVER happened and this is a reason I remove the immobilizer on all my Ducs.  [evil]  He mentioned he had an idling problem and it stalled but I wasn't there so I am either thinking bad gas or he's not yet accustomed to the engine warming, fast idle and so on.

Any ideas on what may be the problem guys?
Can we thin the gene pool? 

2015 MTS 1200
09 Electra Glide

muskrat

Can we thin the gene pool? 

2015 MTS 1200
09 Electra Glide

Howie

I would call SOS and see if they can help.