Main Menu

bike wont start flashing dash lights and funny temp readings

Started by darksouls, August 15, 2015, 11:55:37 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

ducpainter

#15
August 16, 2015, 02:44:25 PM
You're not the first to get water in your cluster on that vintage bike. I don't think a new gasket will help.
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


Howie

#16
August 17, 2015, 04:23:40 AM
Also ask about where to get your computer reflashed in the appropriate "Local Club Board " in this forum.  With the immobilizer killed you can use an aftermarket dash and it will run with no dash at all.

darksouls

#17
August 17, 2015, 12:09:59 PM
Quote from: ducpainter on August 16, 2015, 02:44:25 PM
You're not the first to get water in your cluster on that vintage bike. I don't think a new gasket will help.
I dont think it will either. the gasket looked great. Maybe i'll get the silicone out. Probably the immobilizer will be a winter fix since I have to send the ECU out. My nearest dealer acted like i was insane for wanting it done.

EEL

#18
August 17, 2015, 01:09:52 PM Last Edit: August 17, 2015, 01:13:01 PM by EEL
I believe there is a receiver loop under the ignition. It's been a long time but i kind if remember it being a circular lasso below the key.  You might want to see if this loop has moved or the connector wiggled loose or the connector was shorted due to moisture . Sometimes it can get finicky because of this and it won't pick up the signal from the chip in the key.

It might still be the dash like others have said but its a simple check and a huge savings.

Print
Go Up Pages 1 2
User actions