rear turn signal problem

Started by zharber, October 19, 2015, 10:03:50 PM

Previous topic - Next topic

zharber

Recently purchased an integrated tail light. Problem I'm running into is that my rear right side blinkers wire white/green has no voltage to it for some reason. Any ideas on problematic areas  to inspect while trying to track down this issue?

Speeddog

There's been 22 years or so of Monsters.

Which one do you have?
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

zharber


Speeddog

Is this with the integrated taillight hooked up?

The old-school relays really don't like the LED's.

Did that taillight come with any resistors to provide some load to make the blinker relay work right?
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

zharber

Currently I have just the 3 main wires hooked up to the taillight and have the blinkers disconnected all the way around. Ive hooked the meter up to all 4 blinkers  power wires the only one that doesn't get any voltage to it is the right rear. Ive checked all the fuses and are not blown. Yes it does have a sub harness for the integrated light with resistors built in that I will use once I can track down this white/green wire issue on the rear.