Led turn signal issues

Started by xcanuc, December 28, 2015, 09:27:22 PM

Previous topic - Next topic

xcanuc

I just bought an 01 m600. It has led signals already installed. The left side works great but the right side pulses the headlight and nothing happens to the signals. Anyone seen this issue before?  If not does anyone have the wiring diagram for my bike?

Tia
Steve

Howie

The owner's manual is available here  http://www.ducati.com/services/maintenance/index.do  and the wiring diagram is in the back.  From your symptoms I would start with the switch then move down to the harness from the switch that runs along the head tube. 

xcanuc

Thanks Howie. My next day off is Sunday. Hopefully I can find the issue then.

xcanuc

I did order a new flasher from super bright LEDs and installed it tonight just to check. Now when I try either side turn signal both sides flash.

Kopfjager

Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

xcanuc


Howie

You need either resistors in series  http://www.monsterparts.com/pc/EE033H/Elec-Signals/EE033H.html  is an example from our sponsor Monsterparts with a directional on both sides or a compatible electronic flasher  http://www.delcity.net/store/LED-Flasher-Relay/p_748191 might work.  Flashers are a crapshoot, resistors work.  This assumes all else is good.