451.1.025.1A Fixed tensioner assembly

[Bimbo]

I hate to jump straight in with a question on my first day, I'm afraid my searching has turned up nowt.

I'm recommissioning the wife's 750M after it has been sat for five years and would like to remove the fixed tensioner / belt guide, but it is not a standard bolt head, just has two flats that are about 10mm and I wondered what people use to remove it. I can get a spanner on but no room to apply any leverage (or swing a hammer )

Cheers
John

[koko64]

Try HDESA or HDSEA (iirc) for a special tool.
Also Motomfg.com.

[Duck-Stew]

I used to use a 10mm crows-foot socket on a 3/8” ratchet w/extension.  After many removals, the tool was looking a bit haggard.