Main Menu

Looking for specs on hub dimensions for a set of 96 monster wheels

Started by deftone, January 20, 2012, 09:49:42 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

deftone

January 20, 2012, 09:49:42 AM
 hello all...

i am heavily customizing a 96 Bimota that has a 96' Monster 900 engine....it also has 3 spoke marchesini forged aluminum wheels...i am wondering if they are the same spec as monster wheels so i can possible change them to something different...i am first looking for inside of rotor to inside of rotor dimension on front wheel and inside of sprocket to inside of rotor on rear wheel....from this dimension i can determine if they are close.....if yo uhave more dimensions by all means let me have them pleas....but bearing diameter and center spacing can all be determined later...if the above 2 dimensions are larger than what i have currently the swap will be difficult...
thanks
Tony
analogmotorcycles.com

ducpainter

#1
January 21, 2012, 01:58:22 PM
I have a 96 Monster.

Can you use assembled measurements?

"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


avizpls

#2
January 22, 2012, 08:27:12 AM
Posting to remember. I should have them all in a few hrs for you.
#11

ducpainter

#3
January 22, 2012, 08:31:02 AM
Quote from: avizpls on January 22, 2012, 08:27:12 AM
Posting to remember. I should have them all in a few hrs for you.
Cool...

I won't have to go out in to the freezing barn... ;D
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


avizpls

#4
January 22, 2012, 09:24:02 AM
hours go fast where I live.

I measured these with no rotors, no sprockets. so the measurements are from the mounting faces for the rotors and sprockets. I think thats what you wanted, right?
Front wheel:
Front

  • width: 104.95mm
  • Bearing ID: 20.0mm
  • Bearing OD: 47.0mm

Rear

  • width: 153.05mm
  • Bearing ID: ~17mm
  • Bearing OD: ~40mm

The wheels are off, stripped, and in my cozy warm garage if you need anything else?

#11

deftone

#5
January 22, 2012, 06:42:57 PM
perfect thanks for all the help guys!!! [thumbsup]

Nibor

#6
January 25, 2012, 04:03:59 PM
If your monster wheels will fit then obviously the bimota will fit a monster. If that's the case and you're not keeping them, let me know :)
Print
Go Up Pages1
User actions