Replacing end caps on Arrow CF cans?

[WhiteStripe]

Does anyone have a link to instructions or a write-up on swapping out the end caps on an Arrow CF can.

Looking to put in the end-cap that will accept the DB killer. 

[redial]

I dont even understand the concept of making things quieter 

[teddy037.2]

all you gotta do is drill out the rivets on the cap end of the exhaust can, swap the caps out and re-rivet.

cake 

[WhiteStripe]

cake 

Not sure if you are being sarcastic or not?  Drilling out the rivets seems simple - re-reviting has me stumped.

[teddy037.2]

no, seriously. it's easy.

you will need one of these:



to install the new rivets... I imagine any proper hardware store would carry it

[WhiteStripe]

Thanks - does anyone have some suggestions on rivet size etc.  Little nervous about drilling down into the can...

[Gus Duc]

Here's a good link from ToB.....http://www.ducatimonster.org/forums/accessories-mods/175267-baffles-arrow-cabon-s2r1k-where.html

Funny....... the guys name is Grazi   So thank him