MotoCreations Boom Tubes exhaust for the S4RS

Started by c_rex, May 16, 2008, 12:39:24 PM

Previous topic - Next topic

He Man

#120
if i had to guess, theres no place for the gas to expand, so the sound just comes out raw.

for real exahust systems. the gas has a chance to expand (thus queit down).

angler

#121
Well I just ordered a set with black ceramic coating, the quietest baffles and pencil tips.  It will likely take me until the end of January to get them installed, but count on me to record sound levels with my current cored and udderless stock system, no baffles, and with the quietest baffles Mark uses.  Anybody in the DC metro have a decibel meter?  If I had one, I'd measure dB as well.

I've got to say that Mark is a pleasure to do business with as he definitely puts the customer first!
996 forks, BoomTubes, frame sliders, CRG bar-end mirrors, vizitech integrated tail light, rizoma front turn signals, rizoma grips, cycle cat multistrada clip ons, pantah belt covers - more to come

The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by menacing it with an endless series of hobgoblins, all of them imaginary. H. L. Mencken

Jaman

Quote from: angler on December 16, 2008, 08:00:29 AM
Well I just ordered a set with black ceramic coating... I've got to say that Mark is a pleasure to do business with as he definitely puts the customer first!

+1!

thruxton

Quote from: angler on December 16, 2008, 08:00:29 AM
Well I just ordered a set with black ceramic coating, the quietest baffles and pencil tips.  It will likely take me until the end of January to get them installed, but count on me to record sound levels with my current cored and udderless stock system, no baffles, and with the quietest baffles Mark uses.  Anybody in the DC metro have a decibel meter?  If I had one, I'd measure dB as well.

I've got to say that Mark is a pleasure to do business with as he definitely puts the customer first!

hey. i have the termi system and it has the fit and finish that only a racer could love. i get 126 rwhp (dyn0-tuned) and it sounds great: not too loud, just a great growl. but the pipes, especially, look like sh1t, while the carbon is slowly fading, i think.

plus, hell, the low slung look of these boom-tubes is awesome. i want!

but i would like more data regarding db. there should be more on youtube. come on guys  [popcorn]

Monkey Pants

Bumping this up to see if anyone has measured db, posted sound files, youtube, anything.

Thanks!

zLoki

 [popcorn]

Just in time, I guess I'll wait on new pipes until your 696 stuff comes out...
Mostly stock '12 796
Sold - '09 696 with 30,000 miles

inchull

Just bought a set for my S4RS, I plan on doing a before and after pic + youtube of each.  Don't have a decibel meter or anything handy though.

If I take the video with the same camera both times, I figure it'll give a pretty good representation of the sound difference.  I run just the open udder at the moment.  Installing Boomtubes with medium baffling hopefully sometime this week.

Open airbox, open clutch, FatDuc on my setup.

Any rev requests?  Idle, rev to 8k, hold at 4k or something like that was what I was thinking.  With the udder, then the 'tubes.

No guarantee on the sound clips, I'm just trying to be nice  :)  I'll try my best to do it scientifcally.

My neighbors may end up shooting at me before I'm done.

ProTeal55

Go find yourself an industrial park on a a Sunday to do your passes... [thumbsup]
ProTeal55 a.k.a JoeyCocks a.k.a Joe
Member: Half Fast Chicago

Website:
http://www.HalfFastChicago.com