Sorry, Another Newb question!

[CCEMN1]

I have a 2007 S4RS. I bought a used full Termi system, with DP ECU, filter, everything. I'm at a loss to figure out what these remaining parts are for? The cast aluminium, heat sink looking thing, fite perfectly on the bottom of the ECU, but that won't allow it to be mounted in it's original position? The plastic parts apear to have the ability to "clip" to the frame for some purpose?
Has anyone here been there and done this, that might be able to offer some guidance?
Thanks guys!

[CCEMN1]

Nobody has a clue as to what this stuff is for???

[stopintime]

There are lots who knows, for sure. Try asking specifically? (Termi left over parts?)(Termi/ECU mystery parts?)

[rockaduc]

Beats the hell out of me.  Sorry. Maybe the previous owner gave you some "left-over parts" from something else. it doesn't look like those parts go to the termi kit at all.

[TAftonomos]

The heat sink is exactly that, and you'ld be smart to put it where it belongs on the ecu.

The upper right hand pictured plastic piece is a wire guide.  It screws into the battery box/ecu bolt on the left hand side of the bike.  I don't immediatly recognize the left side piece, but I bet you it's similar to the right hand side one.

Looks like the previous owner left off some "excess" parts when he/she installed the ecu....scary (IMHO) that the heat sink was left off.


go to ducati.com, then bikes, and download the parts fiche..... look around in there and it should become clear.

[junior varsity]

Like stopintime was getting at, Try to name your original thread topics with more description and you'll find a lot more knowledgeable people will poke their head in with words o' wisdom.