Changing Headlight Bulb on M696

Started by whatsup, December 18, 2009, 10:17:32 AM

Previous topic - Next topic

MagglioPR

Does anyone knows how put back the wire clips that holds down the bulbs? Each one has two bolts. Which one goes first? I replaced "temporarily  [bang]" the H1 and H7 bulbs. BTW the OSRAM Siverstar bulbs really makes a difference.
Let it be.

Povidius

Quote from: MagglioPR on May 13, 2010, 03:41:18 AM
Does anyone knows how put back the wire clips that holds down the bulbs? Each one has two bolts. Which one goes first? I replaced "temporarily  [bang]" the H1 and H7 bulbs. BTW the OSRAM Siverstar bulbs really makes a difference.

I didn't have to remove any of the bolts.  I pressed down on the right side of the clip and moved it towards the top. Once free of the bolt on the right side, I just simply flipped the wire clip to the left and pulled out the plug.

If you removed both bolts, I'd put the wire clip back in its place, then screw in the left bolt then screw in the right bolt.  [thumbsup]

MagglioPR

#17
Quote from: Povidius on May 13, 2010, 06:42:55 PM
I didn't have to remove any of the bolts.  I pressed down on the right side of the clip and moved it towards the top. Once free of the bolt on the right side, I just simply flipped the wire clip to the left and pulled out the plug.

If you removed both bolts, I'd put the wire clip back in its place, then screw in the left bolt then screw in the right bolt.  [thumbsup]

You are the best.  [bow_down] Thank you.

Let it be.