problem with the turn signals. just did a integrated tail?

[COP TZR]

If this is your problem, which it sounds like it is, you'll HAVE to use the 2 diodes separating the left and right blinker circuits at the dash.

Think of the diodes as an electrical 1 way gate.

hmmmmm...........where does one get these particular diodes?  Are there different types/sizes?  Which ones do I need, and is it one diode per side?

[COP TZR]

hmmmmm...........where does one get these particular diodes?  Are there different types/sizes?  Which ones do I need, and is it one diode per side?

 

[DarkStaR]

Search button result:
http://ducatimonsterforum.org/index.php?topic=3823.0

Ignore last the schematic I posted, as I think this one is correct and the other is wrong.

[4DoorSi]

have you tried putting resistors on your rear-only blinkers?  It'll cost you $5 at radio shack.  Get the biggest 10ohm resistors you can find, i think i found like 10 watt.  Wire them in parallel with the blinker, so between the hot and ground wires.