Main Menu

S2R 800 -> S2R 1000 brake conversion

Started by hackers2r, May 04, 2009, 07:38:35 AM

Previous topic - Next topic
Print
Go Down Pages 1 2 3
User actions

teddy037.2

#30
January 24, 2010, 05:54:26 PM
Quote from: Privateer on January 24, 2010, 02:58:30 PM
sorry to revive an old thread, but I didn't want to have to explain too much back story

I've been keeping my eye out for some new MCs to swap out my coffins and I came across these today http://cgi.ebay.com/ebaymotors/Brembo-pump-for-Ducati-999R-clutch-and-brake_W0QQitemZ120521275420QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item1c0fa0b81c


Anyone know if that, or something like it, would go onto my 620 without too much grief?


Thanks
Andy

I'd guess new lines at the least... oh, and a solution for your mirrors, unless you already have barend types...

badgalbetty

#31
January 29, 2010, 04:57:50 AM Last Edit: January 29, 2010, 05:01:51 AM by badgalbetty
If you are worried about the amount of brake lever travel at the master cylinder, there is an easy fix. Use two different brake lines from the stock s2r800 master cylinder. I have two new lines one for each caliper and the brake lever travel is actually far less than the stock system. Easy to make and if anyone needs measurements for the front end I have fitted let me know. I have the DP showa fully adjustable front end which is longer than the stock s2r800 front end.
BGB
"Its never too late to be who you might have been" - George Elliot.

Punx Clever

#32
January 30, 2010, 11:45:14 AM
Those 999 levers/masters look damn good on my bike.  That's all I know  8)
2008 S2R 1000 - Archangel

The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.  - HST

gambit688

#33
September 11, 2010, 09:02:45 AM
Quote from: badgalbetty on January 29, 2010, 04:57:50 AM
If you are worried about the amount of brake lever travel at the master cylinder, there is an easy fix. Use two different brake lines from the stock s2r800 master cylinder. I have two new lines one for each caliper and the brake lever travel is actually far less than the stock system. Easy to make and if anyone needs measurements for the front end I have fitted let me know. I have the DP showa fully adjustable front end which is longer than the stock s2r800 front end.
BGB


What are those risers for the clipons you have (sorry to derail\necro the thread)
All the world will be your enemy, Prince of a Thousand enemies. And when they catch you, they will kill you. But first they must catch you; digger, listener, runner, Prince with the swift warning. Be cunning, and full of tricks, and your people will never be destroyed.

Ride: 06 S2R 800 Red and White

DarkStaR

#34
September 11, 2010, 03:32:59 PM
Print
Go Up Pages 1 2 3
User actions